0713 TURAPORI ALL' ACQUA
2Pages

TURAPORI ALL’ACQUA 0713.Transparent waterborne sanding sealer transparent-milky acrylic dispersion matt 1.01 kg/l ( + 0.02) 8 t 10 m2/l per one coat according the type of wood. 12 months in original sealed container. Wooden surface must be dry, clean and free from oil or grease. Remove pre-existing finishes to bare wood. Apply one or two coats of TURAPORI ALL’ACQUA. After 2 t 3 hours sand down the sealer, take off dust, and continue the painting using water-based finish. Mix well to even consistency. - brush - roller - spray gun with nozzle 0 1.3 t 1.5 mm and pressure of 3 t 4 bar. 10 t 15% water when using a brush or roller, 15 t 20% for the spray application. 50 t 80 jum wet film 20 t 40 um dry film Dust free : 20 minutes 14/04/16 LRC/nz Description and use One-component water-reducible undercoat, easy to sand and with high filling power, suitable for wood preparation before painting items exposed both indoors and outdoors (shutters and frames, furniture, matchboarding, etc.) Technical data Colour Binder Dry film appearance Specific gravity Practical cover rate Storage life NB: Data recorded @ 20°C (68°F) The product is compliant with Directive 2004/42/CE-IIA(d) maximum VOC limit value:130 g/l (2010) Application note Substrate preparation Product preparation Application method Recommended thickness Sandable NOTE: Max. humidity of the wood 15%. Do not apply in foggy or rainy weather, or when the relative humidity exceeds 75%. Surface and ambient temperature must be above + 5 (41°F) and below 35°C (95°F) IMPA Spa - Via Crevada 9/E - 31020 San Pietro di Feletto (TV) Italy - tel. +39 0438 4548 - fax 0438 454915 - www.impa.it - info@impa.it

TURAPORI ALL’ACQUA Transparent waterborne sanding sealer 14/04/16 BEWARE OF FROST. Store the product between + 5 and 30°C (86°F) Information provided in this technical data sheet is based upon our best experience and technical knowledge; it does not absolve the users from carrying out tests and preventive checks in order to verify the suitability for use. For further technical information about specific systems and/or special applications, please contact our TECHNICAL SERVICE. This note replaces all the previous ones. Please, make sure to have the latest issue. The above mentioned data are...