THERMAL SOLAR SYSTEMS
84Pages

immergas.com Immergas S.p.A. 42041 Brescello (RE) - Italy T. 0522.689011 F. 0522.689178 IMMERGAS SPA - ITALY CERTIFIED COMPANY UNI EN ISO 9001:2008 Design, manufacture and post-sale assistance of gas boilers, gas water heaters and related accessories THERMAL SOLAR SYSTEMS General catalogue THERMAL SOLAR SYSTEMS Immergas reserves the right to make such changes to its products as are deemed necessary for their evolution, without prior notice. Cod. CE. 0450 - rev.001 (ver. 602) - 09/17 - Litocolor - Guastalla (RE) THERMAL SOLAR SYSTEMS

NATURAL SOL Options Code Solar valve kit for istantaneous wall-hung boilers* Kit for coupling an istantaneous boiler downstream the solar heating system, then supplying the cold water inlet of the boiler with water preheated by NATURAL SOL ¾” thermostatic mixing valve kit Can be calibrated from 42 to 60 °C Maximum inlet temperature of 90 °C Integrative 1,5 kW electric resistance kit (ideal to guarantee the anti-freeze function) Ideal to guarantee the anti-freeze function, can be calibrated by a specific thermostat Pressure - temperature safety valve kit Can be used instead of magnesium...

I PUMP-CIRCULATED SOLAR PACKS for domestic hot water p. 10 I COMBINED PUMP-CIRCULATED SOLAR PACKS for heating and domestic hot water p. 28 | INDIVIDUAL SOLAR COMPONENTS for pump-circuLated systems p. 38 I SOLAR PACKS WITH NATURAL CIRCULATION for domestic hot water p. 74 Indicative performance of solar packs for production of domestic hot water The solar packs are presented with indications on the number of people who can be served on a level of the domestic hot water demand. These indications are provided referring to: - solar collectors facing south and installed at a 30° angle in Italy....

IMMERGAS: THE SUN IS SHINING ON THE FUTURE OF ENERGY Immergas, active for over 50 years in the gas boiler and thermal systems sector, represents one of the most advanced realities in offering high technological level energy solutions. Due to its strong tendency towards innovation, it was among the first companies to realise the new environmental functionality and sustainability requirements coming from the domestic heating market. It has responded with a full range of products and integrated solutions featuring high energy efficiency and low environmental impact. Today the company would...

SOLAR ENERGY SYSTEMS: SUSTAINABLE CHOICE, SURE INVESTMENT In recent years solar heating systems have imposed themselves as one of the most widespread resources of renewable energy. The growing ecological awareness has stimulated Immergas to further improve the performance of its products by designing innovative solutions for every type of living context. With the new Solar Solutions range, Immergas introduces new system solutions to make it easier for designers and installers to offer efficient integrated systems, capable of providing high energy savings.

SOLAR SOLUTIONS RANGE: THE RENEWAL OF SOLAR ENERGY The Immergas Solar Solutions range has been renewed by developing latest-generation products and systems capable of exploiting solar energy to a maximum and offering new standards of comfort. The technological excellence of Immergas solar components is expanded with CP4 M/XL flat-plate collectors and the CSV 14 vacuum collectors. In response to an ever-growing need of sustainable consumption, the absorption surface of the panels has increased (by over 2.51 m2), thus favouring greater energy performance and a better use of renewable...

SOLAR READY INTEGRATED SOLUTIONS: SPECIFIC TECHNOLOGICAL SYNERGY The floor standing condensing boiler HERCULES Solar 26 ErP, combines in a small space the advantages of condensation and the possibility of heating domestic hot water with solar energy with the technology of the integrated 200-litre stainless steel storage tank. It is the ideal solution for new systems. For designing special solutions or for systems integrated in thermal systems, Immergas provides a wide range of individual components and accessories with which any type of technical solution proposed can be adequately sized.

IMMERGAS STORAGE TANKS, OUR PRIDE FOR OVER 30 YEARS The technological excellence and the accurate choice of materials have always distinguished Immergas products. Immergas has been building its storage tanks using stainless steel for over 30 years, making it one of the strengths of the company: a strategic advantage, supported by growing investments, that have allowed our manufacturing departments to extend the range of stainless steel storage tanks with solutions up to 500 litres in capacity. In solar energy systems, storage tanks act as an real energy reservoir. Designed to use solar...

INOX STAINLESS STEEL RELIABILITY A GUARANTEE OVER TIME Stainless steel is an efficient material which remains unchanged by the action of water even when solar energy makes it reach high temperatures. A PERFECT THERMAL EXCHANGE There is a double stainless steel coil inside the storage tank which maximises the production of domestic hot water, also taking advantage of solar energy. Moreover the perfect insulation reduces heat losses to a minimum thus favouring lower consumption levels. SIMPLE MAINTENANCE A specific flange makes it easy to clean the inside of the storage tank. Stainless steel...

INOX SOL 200 V2 1 CP4 XL flat-plate collector + Inoxstor 200 and accessories NEW p. 12 INOX SOL 200 LUX V2 1 CSV 14 vacuum collector + Inoxstor 200 and accessories NEW p. 14 INOX SOL 300 V2 2 CP4 XL flat-plate collectors + Inoxstor 300 and accessories NEW p. 16 INOX SOL 300 LUX V2 2 CSV 14 vacuum collectors + Inoxstor 300 and accessories NEW p. 18 INOX SOL 500 V2 4 CP4 XL flat-plate collectors + Inoxstor 500 and accessories NEW p. 20 INOX SOL 500 LUX V2 3 CSV 14 vacuum collectors + Inoxstor 500 and accessories NEW p. 22 BASIC SOL V2 1 CP4 XL flat-plate collector and accessories p. 24 BASIC...

The INOX SOL TOP V2 and BASIC SOL TOP V2 solar solutions, ideal for houses and small businesses, are made up of 8 complete packs for the production of domestic hot water. Each pack is provided with an indication for its use, in order to satisfy 50% of the solar coverage of the yearly primary energy demand for the production of domestic hot water. The data supplied, with collectors facing south and inclined at a 30° angle in Italy, is variable depending on the location and type of installation. Have the system checked by a qualified thermotechnical designer to dimension it ideally. LIST OF...