RAPAX V2
8Pages

HEAT PUMP ®imm RAPAX V 2 Heat pump water heater

Heat pump water heaters The RAPAX V2 heat pump water heaters can completely eliminate the use of gas for domestic hot water because they apply the same principle as heat pumps. This is one of the new, effective solutions designed by Immergas to make the best use of renewable energy sources. RAPAX V2 heat pump water heaters have a 270 litre insulated enamelled steel storage tank and can be installed even in a garage, laundry or storeroom. The RAPAX V2 range is ideal when renovating and creating heating systems in detached houses to produce domestic hot water with renewable energy sources. It...

REDUCED CONSUMPTION AND RESPECT FOR THE ENVIRONMENT RAPAX V2 range water heaters significantly reduce polluting emissions compared to traditional gas water heaters. Thanks to a heat pump, they use the heat in the air as a source of free, renewable energy for heating water. Through an electrical contact, they can also store the heat produced with the photovoltaic system in the boiler. The RAPAX 300 SOL V2 version can be combined with a forced-circulation solar heating system to further reduce power consumption. SILENT OPERATION RAPAX V2 have the lowest sound impact in the field so they are...

USER INTERFACE AND FUNCTIONS New integrated interface allows an easier use. The control lets you view measured temperature, operation times of heat pump or electrical supplement energy consumption in kWh, activation of the solar heating circuit (only in the RAPAX 300 SOL V2 version) as well as setting of anti-legionella function. The operation modes as AUTO, ECO and BOOST are always present, but there are two new functions (see below). SOLAR HEATING COMBINATION The RAPAX 300 SOL V2 version has been designed to supplement DHW production with a forced-circulation solar heating system*...

INSTALLATION CONFIGURATIONS INSTALLATION WITHOUT DUCTS IN UNHEATED SPACES (volume > 20 m3) Very useful in a laundry, garage or utility room. In the laundry the advantage is the room dehumidification and the recovery of the wasted heat from washing machines and dryers. INSTALLATION IN UNHEATED SPACES (volume > 20 m3), WITH 1 EXPULSION DUCT In this case, a ventilation opening must be done. INSTALLATION IN HEATED OR UNHEATED ROOMS, WITH 2 DUCTS FOR THE AIR (INTAKE AND EXPULSION) Comply the maximum ducts lengths (rif. Instruction manual). It’s important to use insulated ducts, Ø 160 mm to avoid...

* The ducts are required to intake and espulxion air on external. Its are not insulated.

TECHNICAL DATA Dimensions and connections LEFT LATERAL VIEW Key AC Domestic hot water outlet %" M The use of RAPAX V2 involves the installation of an appropriately sized DHW expansion vessel and safety valve, not included in the supply (Immergas supplies a specific option kit, see on page 6). In accordance with the ELD directive (in conformity with regulation 811/2013), we include the label of each water heater to enable customers to evaluate the products.The labels are shown in the documentation accompanying the units as well as on the immergas.com website in each product's page.

Immergas reserves the right to make such changes to its products as are deemed necessary for their evolution, without prior notice. Cod. AP.000001.000 (ver.1380) - 01/1 7 aicod.it Immergas S.p.A. 42041 Brescello (RE) - Italy T. 0522.689011 F. 0522.689178 Design, manufacture and post-sale assistance of gas boilers, gas water heaters and related accessories