aimimi IKO enertherm ALU Product description: IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality reflecting ALU cladding consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. Application: • Rooftop: flat roof insulation for timber, concrete and steel deck. • Sarking: pitched roof insulation (type nF with neutral felt). • Floor: floor insulation (underfloor heating and concrete floors). • Wall: cavity wall insulation. • Wrap: outside wall insulation (closed joints). • Comfort: loft insulation. Edge finish: Straight Tongue and groove (TG) Thermal performance: Thermal conduction coefficient: (EN 13165) A„: 0,022 W/(m.K) Fire properties • Fire class according to EN 13501-1: Class NPD • Fire class 'end use' according to 13501-1: B-s2,d0 (steeldeck) • Fire class according to BS 476 - p7 : Class 1 Technical details: • Bulk density: ± 32 kg/m3 • Compressive strength at 10% deformation: 175 kPa (17,5 ton/m2) • Behaviour under uniformly distributed loading: class C (< 5 % deformation at 80 °C and 40 kPa loading) • Closed cells: more than 95% • Water vapour diffusion: PIR foam: ^ = 60 - ALU facing: ^ > 100,000 Technical approvals: Europe: CE - EN 13165: T2-DS(70,90)3-DS(-20,-)1-DLT(2)5-TR80 (< 140 mm) TR40 (> 140 mm)-CS(10Y)175-WL(T)1 Belgium: ATG 2726 - ATG 2727 - ATG H867 France: Certificat Acermi N° 06/103/434 DTA 5/13-2350 Netherlands: Komo Attest met Productiecertificaat CTG 485 Komo CTG 544