Save Programme
16Pages

Machine room-less lifts SAVE Programme Save Programme

2 IGV Installations Overfit® - Gearless MRL traction lift with gearless hoist in the headroom CABIFIT® Traction lift with machinery contained in a cabinet by the side of the shaft CABIFIT DF® Traction lift with gearbox in the shaft, accessible from outside the shaft IDROFIT® Hydraulic lift with machinery in a cabinet SUPERIDROFIT® Hydraulic lift with power unit in the shaft at any floor 3 4 7 10 12 14 Group SpA SAVE Programme is an IGV innovative lift product line for reducing space, installation time and costs by eliminating the traditional machine room. SAVE Programme lifts can be...

3 Installation of an Overfit® - Gearless lift model: 3 stops, double adjacent entrance, Gemini 6® door operator, 630 Kg load. IGV Installations

4 Traction lifts according to OVERFIT-Gearless model are machine room-less systems: the hoist with permanent magnet motor and reducerless is located in the headroom. The control panel is located in the top landing door frame or within the shaft. OVERFIT-Gearless model traction lifts comply with UNI EN81- 1:2005 harmonised standards (corresponding to EN81-1:1998 + A2:2004), and therefore comply with 95/16/EC Lift Directive. They also comply with the requirements of the 89/336/EC Electromagnetic Compatibility Directive and the 98/37/EC Machinery Directive, where applicable. MRL traction lift...

5 Shaft and car dimensions example Q CW CD DO SW SD SD std (1 entrance) (2 entrances) 375 800 1200 750 1350 1550 1740 375 800 1200 800 1400 1550 1740 480 950 1300 850 1500 1650 1840 480 1000 1250 900 1550 1600 1790 630 1100 1400 900 1650 1750 1940 Other car and load dimensions are also available. Rated Car dimensions Door opening Shaft dimensions load [kg] [mm] [mm] [mm] Overfit® - Gearless

7 Type of drive Traction Rated load 1100 Kg max Rated speed 1 m/s max Travel 50 m max Pit 1200 mm min Headroom* 3700 mm min No. of stops up to 24 . Type of drive Traction Rated load 1600 Kg max Rated speed 1 m/s max Travel 40 m max Pit 1500 mm min Headroom* 3900 mm min No. of stops up to 24 . Type of drive Traction Rated load 1100 Kg max Rated speed 1,6 m/s max Travel 50 m max Pit 1500 mm min Headroom* 3900 mm min No. of stops up to 24 Benefits The machinery occupies an area of less than 0.4 m2, instead of about 4 m2 for the traditional machine room. The cabinet height is 2 metres, which is...

8 SW CW 1050 DO 400 CD SD HA QW SW CW 1050 DO 400 CD SD HA QW DW HW HA SD 1180 Dimensions of hole in the wall for gearbox frame Cabinet height: 2000 mm 2000 HW 1180 masonry shaft machinery Cabifit®

10 - Speed 1 m/s Type of drive Traction Rated load 1100 Kg max Rated speed 1 m/s max Travel 50 m max Pit 1200 mm min Headroom* 3700 mm min No. of stops up to 24 . Type of drive Traction Rated load 1100 Kg max Rated speed 1,6 m/s max Travel 50 m max Pit 1500 mm min Headroom* 3900 mm min No. of stops up to 24 The lifts designed in compliance with CABIFIT-DF model are characterised by the gearbox placed in a side wall of the shaft, safely contained in a space with a key-locked door cover. The control panel, main supply and light switches can be placed inside a cabinet at any landing door....

11 SW DO CW DO CD SD SD CD SW CW 320 320 DO QW QW 290 290 HA HA MW MW masonry shaft machinery 50 50 HA SD HW 1180 Examples of car, door and shaft dimensions, in case of 2-panel telescopic doors Rated Car Door Shaft Aperture Hole Cabinet Wall load [kg] dimensions opening dimensions axis width width Q CW CD DO SW SD SD HA* HA* HW QW MW (1 entrance) (2 entrances) (1 entrance) (2 entrances) min. 630 1100 1400 800 1700 1800 1940 635 615 970 1100 250 630 1100 1400 900 1700 1800 1980 635 635 970 1100 250 850 1400 1400 900 2000 1900 1940 550 590 970 1100 250 1000 1100 2100 900 1700 2500 2640 1000...

12 Type of drive Hydraulic Rated load up to 2000 Kg Travel up to 21,5 m No. of stops up to 9 Pit according to load Headroom according to car height Rated speed 0.63 m/s max The IDROFIT model machinery (power unit, controller, main and light switches) is contained in its relevant cabinet. The lift complies with harmonised Standard EN81-2:1998. Benefits The machinery occupies 0.5 m2 (width 950 mm, depth 550 mm), compared to about 3 m2 required by a traditional machine room (for example width 1500mm, depth 2000mm). All the components such as the main and light switches, thermostat detecting...

13 The range of solutions is very flexible. Contact IGV technical department for customised solutions. masonry shaft machinery 2000 550 950 MAX 20m Hydraulic: indirect acting at side jack 2:1 side direct acting jack centre direct acting jack up to 900 kg with max. speed 0.63 m/s up to 1000 kg with max. speed 0.50 m/s up to 1500 kg with max. speed 0.30 m/s up to 2000 kg with max. speed 0.25 m/s max. 9 max. 21.5 (function of rated load and static load of the lift) max. 3 max. dimensions compatible with the shaft dimensions max. dimensions compatible with the car and shaft dimensions automatic...

14 The Superidrofit lift model has the power unit inside lift shaft. The controller and all electric equipments are placed inside a landing door frame. Benefits No machine room needed. Main switches, thermostat detecting the temperature of the area, lamps, are inside the landing door frame. The floor where the power unit and electric equipments are located can be the lower, any intermediate or the upper floor. The minimum dimensions of the headroom and the pit are the same as for a conventional lift with a machine room. In other words the power unit in shaft does not affect the pit and...

www.igvlift.com Group SpA Via Di Vittorio, 21 20060 Vignate, Milan - Italy Tel. +39 02 951271 Fax +39 02 9560423 www.igvlift.com www.domuslift.com Lifts since 1966 I.P. ED 10/2009 DomusLift® DomuStair® DomuStair® DomusPlat® Cars MRL lifts SuperDomus® Components