Overfit
3Pages

Variable frequency type gearless Rated load > * travel max value is only as an indication and it is subject to any potential use of compensation chain This is a space-saving system thanks to the Thanks to the gearless motor and the lack of machine room. The machine is fully speed frequency control guaranteed by contained within the shaft, supported by a high quality inverter, high ride quality, guide rails. The whole lift load is backed by noiselessness within the car and building, the car and counterweight guide rails and better system performance, reduced power neither bearing beams to be fixed to the installation and consumption (also in terms shaft walls nor other masonry works are of energy costs), less mechanical stresses required. The service cabinet, next to the and motor temperatures are achieved. top landing door, has a reduced depth and minimum aesthetic impact. A range with 630 to 1000 kg load is also available with 2:1 tackle suspension (Overfit-Gearless 21 model): this geometry allows the manufacturing of cars with two opposite entrances. > Besides the standard safety systems, speci - The machine is fixed in the headroom, abo - fic devices for these machine room-less sy - ve an appropriate frame connected to the stems are provided. car and counterweight guide rails in an ex - tremely steady position. The passenger rescue operation is carried out from outside, after opening the cabinet Machine maintenance operations are car - front panel located in the top landing door ried out inside the shaft, standing on the frame. An auxiliary manual operation can be car roof. Car control and steadiness are carried out whenever one of the safety con - guaranteed by a guide rail mechanical stop tacts has been released (safety gear, limit system. switch, bumpers, overtravel switch). This same operation can be carried out also in For the version with electric panel in the case of brake coil failure, by opening it with shaft and service cabinet at landing, the a mechanical system: this operation also al - electric panel maintenance is carried out lows the car movement towards the unba - standing on the car roof as well. lanced load, with a reduced speed control - led by the motor windings. A camera allows to watch the machine and traction pulley in order to check the car movement direction. Optionally, the mechanical operation is pro - vided bringing the car to a landing and ope - ning the doors. 4 >

Variable frequency type gearless Rated load 630 kg - max 1000 kg Travel * 40 m max Pit ** 1500 mm min * travel max value is only as an indication Headroom * ** and it is subject to any potential use 3700 mm min of compensation chain ** pit can be reduced down to 1350 mm Rated speed with 3850 mm headroom 1 m/s *** for car height max 2150 mm 2AT telescopic doors Rated Car Door Shaft > Rated Car Door Shaft load [kg] dimensions opening dimensions Q CW CD DO SW SD SD > ��� Other car and load dimensions are available. Please contact the IGV technical office for special solutions. Dimensions are...