Icopal Elastoflex LWS Warm Roof Insulation System

Speed of installation Ideal for complex roofs One component Adaptable Fast curing Elastoflex LWS Warm Roof Insulation System Cold applied liquid membranes have historically focused on roof Features & Benefits refurbishment projects, however their growing popularity have seen a rise in demand for its adaptability to other applications. No Carrier Membrane - The insulation and board facings are Icopal’s Elastoflex Liquid Waterproofing System introduces two specially designed to receive the Elastoflex system without the new warm roof insulation boards, creating further opportunities need for a carrier...

Icopal Elastoflex Liquid Elastoflex LWS Warm Roof Insulation System System Components Elastoflex Waterproof Coating - base layer Elastoflex Reinforcing Mat Embedded Substrate Elastoflex Membrane dressed to detail Elastoflex Waterproof Coating - Top Layer Insulation Adhesive Joint Reinforcement Icopal Vapour Control Layer Bituminous Surface Primer Elastoflex LWS is a cold liquid-applied waterproofing system Accessory Products: which is applied with a reinforcing fleece in a ‘wet-on-wet’ Elastoboard F Foil Jointing Tape (70mm x 45.7mm) process which cures to form a seamless, elastic membrane. Elastoboard...

Thermazone Elastoboard F Description Facings: Thermazone Elastoboard F is faced on both sides with a Thermazone Elastoboard F must be laid on a smooth surface multi-layered complex of kraft paper and metal foil autohesively which is clean and free of debris. A suitable vapour control layer bonded to the insulation core during manufacture. must be applied over the structural deck in accordance with the manufacturer’s instructions. Thermazone Elastoboard F must be bonded to the specified Thermazone Elastoboard is manufactured from a high vapour control layer using polyurethane insulation adhesive,...

Icopal Elastoflex Liquid Thermazone Elastoboard H Description Facings: Thermazone Elastoboard H is faced with a 3mm highly Thermazone Elastoboard H must be laid on a smooth surface dense reinforced bitumen to the upper surface and a multi- which is clean and free of debris. layered complex of kraft paper and metal foil to the underside A suitable vapour control layer must be applied over the which are autohesively bonded to the insulation core during structural deck in accordance with the manufacturer’s instructions. Thermazone Elastoboard H must be bonded to the specifed vapour control layer...

Tapered Insulation The fall on a flat roof should be smooth and steep enough to Board Sizes prevent the formation of rainwater ponds. To ensure adequate drainage, ‘BS 6229: 2003 (Flat roofs with continuously supported coverings. Code of practice)’ recommends uniform gradients of The fall on a flat roof constructed using Thermazone Elastoboard is normally provided by the supporting structure being directed towards the rainwater outlets. However, because of building settlement, it is advisable to design to even greater falls. Alternatively, falls may be provided through use of a tapered roof insulation...

Icopal Elastoflex Liquid Physical Properties Performance and Properties Thermal Properties: Compressive Strength: Typically the compressive strength of Thermazone Elastoboard exceeds 150kPa at 10% compression and 125kPa at 5% when tested to BSEN 826:1996 Thermal the Harmonised European Standard ‘BS EN 13165: 2001 Insulating Products for Building applications. Determination of (Thermal insulation products for buildings – Factory made rigid Compressive Behaviour. polyurethane foam (PUR) products – Specification)’ using so –values and R–values quoted are in accordance with called 90 / 90 principles....

Icopal Ltd Barton Dock Road Stretford Manchester United Kingdom M32 0YL Tel: +44 (0) 161 865 4444 Fax: +44 (0) 161 864 2616 [email protected] www.icopal.co.uk