• Excellent bonding strength.
• Quick drying.
• Easy to apply.

• Bonding primer for waterproofing with bitumen membranes.
• Protective paint for piping and timber or concrete structures.

• Apply to completely dry substrates.
• Avoid using a blowtorch before the product has thoroughly dried.
• Use only in well-ventilated areas.

• Thoroughly clean the surface and remove dust, loose material, grease, oil, and other contaminants.

• Apply at approximately 200 gr/m², depending on substrate porosity and absorption.
• Drying time varies with ambient temperature.
• Ensure proper sealing of pass-through elements like HVAC and piping.
• For residential roofing, use VERAP water-based primer.
• As a bituminous tar, apply at approximately 300 gr/m².
• Clean tools with ICODIL SX.

Ready-to-use primer made from bitumen and high-volatility solvents, classified as bituminous tar.

• Available in 25 Kg, 20 Kg, 10 Kg, and 5 Kg containers.

• Roller, Airless, Brush.

• Type: One component.
• Density: 0.94 (± 0.05) Kg/Lt.
• Solid content: 59 (± 2)%.
• Tack free time: 60 min at +23°C, 50% R.H.
• Dust free time: 120 min at +23°C, 50% R.H.
• Number of coats: 1.
• Spread rate per coat: ≈ 200 gr/m².
• Coverage: 5 m²/Kg.
• Color: Black.
• Shelf Life: 18 months.

• Store in cool, dry, well-ventilated areas away from heat sources. Keep container tightly sealed.

• Refer to the Safety Data Sheet (SDS).

Ensure the Technical Data Sheet (TDS) is up to date by visiting icobit.com. The manufacturer reserves the right to amend product specifications without notice. The performances were measured according to the standards in force at the time of issue and represent average test results. They do not constitute a binding commitment or liability for Icobit Italia S.r.l. The purchaser and end consumer are responsible for ensuring product suitability for intended use. For technical support, contact [email protected].