*myarchiexpo

icopas

Product catalog summary

Product Overview
This document describes a continuous single-component bituminous flexible membrane, known as ICOPAS, used for waterproofing various surfaces such as roofs, terraces, and walls. It is available in two versions: HP (fiber reinforced) for technical detailing and AR (root resistant) for green roofs and planter boxes.

Specifications

Resistant to temperatures as low as -50°C.
Tensile elongation exceeds 2000%.
Seamless waterproofing capability.
Easy application and water impermeability.
Adaptable to irregular surface geometries.

Application Procedures

Apply at least two coats with a minimum interval of 24 hours between applications.
Use reinforcement materials like ICOARM TNT Roll for areas under mechanical stress.
Clean tools with ICODIL SX solvent or mineral spirits.

Surface Preparation

Ensure surfaces are clean, dry, and free from dust, grease, and loose materials.
Prime concrete surfaces with ICOPAS-P.
For metal surfaces, apply ICOPOX PM 102 rust inhibiting primer.

Precautions

Avoid application during intense sunlight or when rain is expected.
Protect from UV rays if exposed.
Do not use generic bitumen primers.

Technical Data

Density: 0.98 Kg/L
Solid content: 57%
Viscosity: ~3000 mPa·s
Full curing time: 24 hours at 23°C
Tensile strength: 1.5 MPa
Cold flexibility: -50°C

Storage and Safety

Store in cool, dry, well-ventilated areas above freezing temperatures.
Refer to the Safety Data Sheet (SDS) for safety measures.

Packaging

Available in 18 Kg, 10 Kg, 4 Kg, and 1 Kg packages.

Contact Information
For technical support, contact [email protected].

Catalog excerpts

Membrana continua impermeabilizzante elastobituminosa Continuous single-component bituminous flexible membrane

Open the catalog to page 1

Progetti d’impiego • Impermeabilizzazione di coperture edili in genere, terrazze in calcestruzzo, vecchi manti bituminosi, muri di fondazione e muri controterra, fioriere, giardini pensili, gronde, converse, dettagli di copertura. • Disponibile nelle versioni: HP (fibrorinforzato) per il trattamento localizzato di dettagli tecnici e AR (antiradice) per giardini pensili e fioriere. • Resistenza alle basse temperature d'esercizio, sino a -50°C. • Elasticity allungamento oltre il 2.000%. • Permette la realizzazione di manti impermeabili continui, senza interruzioni. • Impermeabilita all'acqua. •...

Open the catalog to page 2

Waterproofing of flat and sloped roofs, concrete decks, weathered bitumen felts, foundations, retaining walls, green roofs, planter boxes, gutters, valleys, flashing, roofing details. Also available in the following versions: • HP (fiber reinforced) for localized detailing; • AR (root resistant) specific for green roofs, planter boxes and roof gardens. • Resistant to service temperatures as cold as -50°C (-58°F). • Tensile elongation over 2000%. • Seamless waterproofing. • Flexible and conformable to irregularly shaped substrates. Clean surface thoroughly and remove dust, loose material or non-adhering...

Open the catalog to page 3

Dati tecnici / Technical data INFORMAZIONE SUL PRODOTTO PRODUCT FEATURE Norme di sicurezza / Safety measures Si veda SDS prodotto. / See SDS. Conservare il prodotto in luoghi asciutti e ben aerati, stoccandolo a temperature superiori a 0 °C. / Store in cool, dry, well-ventilated areas away from heat sources, at temperatures above freezing. IMBALLO / PACKAGING Nero / Black METODO D'APPLICAZIONE APPLICATION METHODS Contatta il nostro servizio tecnico alia mail / Please contact our technical support at: [email protected] Assicurarsi che la scheda tecnica sia quella piu aggiornata;...

Open the catalog to page 4

All Icobit Italia catalogs and technical brochures

versol
2 Pages
Keep Dry Metal
12 Pages