Catalogs >
Ice-O-Matic >
ICEU150, ICEU220 and ICEU300 Undercounter Series*

ICEU150, ICEU220 and ICEU300 Undercounter Series*
26Pages

Catalog excerpts

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 1

Installation, Start-Up and Maintenance Manual ICE SERIES CUBERS ICE0250 through ICE2100 Series* ICEU150, ICEU220 and ICEU300 Undercounter Series* ICE0320 and ICE0520 22 Inch Series* *INCLUDES 230/50/1 VOLT UNITS Ice-O-Matic 11100 East 45th Ave Denver, Colorado 80239 Part Number 9081264-01 Date 11/08

Open the catalog to page 1

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 3

ICE Series Introduction How To Use This Manual Ice-O-Matic provides this manual as an aid to the service technician in installation and maintenance of the ICE Series (electro-mechanical) cube ice machines. Do not attempt to perform installation, start-up or maintenance unless you have read and fully understand this manual. If at any time you encounter conditions that are not addressed in this manual, call, E-mail or write the Ice-O-Matic Service Department: Ice-O-Matic th 11100 E. 45 Ave. Denver, Co. 80239 Attn: Technical Service Department E-Mail: Tech.service@iceomatic.com Telephone...

Open the catalog to page 3

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 4

ICE Series Table of Contents Introduction Page i Table of Contents Page ii Freight Claim Procedure Page iii Warranty Page iv Model Number and Serial Number Format Page 1 Installation Guidelines Page 2 Remote Condenser Guidelines Page 4 Electrical and Plumbing Requirements Page 6 How the Machine Works Page 13 Start-Up Procedure Page 14 General Maintenance Page 16 Cleaning Procedure Page 17 Cabinet Care Page 18 Winterizing Procedure Page 19 Maintenance Record Page 20 Page ii

Open the catalog to page 4

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 5

ICE Series Freight Claim Procedure Freight Claims Important! Inspect Promptly This merchandise has been carefully inspected and packed in accordance with the carrier’s packing specifications. Responsibility for safe delivery has been assumed by the carrier. If loss or damage occurs, you as the consignee must file a claim with the carrier and hold the container for carrier’s inspection. Visible Loss or Damage Any external evidence of loss or damage must be fully described and noted on your freight bill or express receipt and signed by the carrier’s agent. The claim should be filed on a form...

Open the catalog to page 5

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 6

ICE Series Warranty Ice-O-Matic Parts and Labor Domestic & International Limited Warranty Mile High Equipment LLC (the “Company”) warrants Ice-O-Matic brand ice machines, ice dispensers, remote condensers, water filters, and ice storage bins to the end customer against defects in material and factory workmanship for the following: • Cube ice machines,”GEM” model compressed ice machines ,” MFI” model flake ice machines and remote condensers. - Thirty-six (36) months parts and labor • “EF” and “EMF” model flake ice machines - Twenty-four (24) months parts and labor • CD model dispensers -...

Open the catalog to page 6

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 7

ICE Series Model and Serial Number Format Model and Serial Number Format Note: Sample of Serial Number Data Plate The serial number format and machine specifics are detailed on the data plate. ICE 040 0 H A 2 Design Level Condenser Type: A=Air, W=Water, R=Remote Cube Size: H=Half, F=Full Voltage: 0=115V, 6=230V/60Hz. 5=240V/50Hz. Approximate Production in 24 hours @70°FAir/50°FWater Series: Environmental Cuber (Uses HFC Refrigerant) This format is 14 characters long and begins with a date code followed by the Ice-O-Matic identifier, and then a sequential number. This is an entirely...

Open the catalog to page 7

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 8

ICE Series Installation Guidelines Installation Guidelines For proper operation of the Ice-O-Matic ice machine, the following installation guidelines must be followed. Failure to do so may result in loss of production capacity, premature part failures, and may void all warranties. Reference the installation parameters prior to installing the machine: Ambient Operating Temperatures Minimum Operating Temperature: 50°F (10°C) Maximum Operating Temperature 100°F (38°C), 110°F (43°C) on 50 Hz. Models. Note: Ice-O-Matic icemakers and dispensers are not approved for outdoor installation. Incoming...

Open the catalog to page 8

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 9

ICE Series Installation Guidelines Secure the machine on top of the bin or dispenser. Attach the ice machine to the bin with the mounting straps provided with the bin or dispenser. Insure that the back of the ice machine is flush with the back of the bin. Proper functioning of the bin door requires the bin door, when it is opened, to be in a stable position. If the ice machine is too far forward on the bin, the opened door may not be stable, resulting in an unexpected closing of the bin door. If the ice machine is to be mounted on a bin or dispenser other than an Ice-O-Matic, refer to the...

Open the catalog to page 9

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 10

ICE Series Remote Condenser Guidelines Remote Condenser Installation For proper operation of the Ice-O-Matic ice machine, the following installation guidelines must be followed. Failure to do so may result in loss of production capacity, premature part failure, and may void all warranties. Use the following for planning the placement of the remote condenser relative to the ice machine. Location Limits: Remote condenser location must not exceed ANY of the following: ● Maximum rise from the ice machine to the remote condenser is 35 physical feet. ● Maximum drop from the ice machine to the...

Open the catalog to page 10

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 11

ICE Series Remote Condenser Guidelines The following remote ice makers incorporate the mixing valve in the condenser. This configuration allows up to a 100 foot calculated remote line set run. Reference the diagram below to calculate the maximum 100 foot line set run. ICE Machine Model Number ICE2106/7R4 ICE1806/7R4 ICE1506HR3 ICE1405/6/7R4 ICE1006R3 ICE806R3 ICE0606R5 ICE0500R5 Remote Condenser Model Number VRC5061B VRC5061B VRC2661B VRC2661B VRC2061B VRC2061B VRC1061B VRC1001B Limitations for new remote machines that have the mixing valve mounted in the condenser. Maximum Rise is 35 feet....

Open the catalog to page 11

ICEU150, ICEU220 and ICEU300 Undercounter Series* - 12

ICE Series Electrical and Plumbing Requirements Electrical and Plumbing Requirements: ICEU150, 220, 225 and 226 31.00 Note: The ICEU150, 220, 225 and 226 do not have a splash curtain. These models utilize a thermostatic bin control in place of a mechanical bin switch. ON-OFF-WASH Switch is located in the control box. Remove the grill screws to access the control box. Page 6

Open the catalog to page 12