Fitting Instructions Overview

This document provides step-by-step instructions for fitting and cartridge replacement for various Bark models including DJ & MH RU BK 200-202, DJ RU BK 220, RU 201-203-223, and DJ RU BK 250-350.

Section 1: Fitting Specifications

• Applicable pipe diameters: Maximum Ø37mm (1.46 inches), Minimum Ø35mm (1.38 inches).

Section 2: Flow Rate Adjustment

• To reduce flow rate: tighten the fitting.
• To increase flow rate: loosen the fitting.

Section 3: Cartridge Removal and Replacement

• Cartridge removal steps are provided for DJ & MH RU BK 200-202, DJ RU BK 220, and RU 201-203-223 models.
• Minimum and maximum insertion depths for cartridge removal are specified as 130 mm (5.12 inches) minimum and 170 mm (6.69 inches) maximum.
• Specific cartridge replacement instructions are given for DJ RU BK 250-350 models.

Critical Parameters and Recommendations

• Ensure pipe diameter compatibility within specified range for proper fitting.
• Adjust flow rate carefully by tightening or loosening to achieve desired performance.
• Follow specified insertion depths during cartridge removal to avoid damage.
• Refer to model-specific instructions for cartridge replacement procedures.