HAS-R1041
1 / 28Pages

HYUNDAI TELECOM

HAPPY TOGETHER, HAPPY TOMORROW

SMART HOME SYSTEM Away Mode monitors a trespass of outsiders. Once the alarm starts ringing, any abnormal situations sensed will be notified to an indoor station, a door phone and a guard phone automatically. Calling option Communicate with a door phone, indoor station of neighbor, guard phone (BUS/STAR) and lobby. Thank you for purchasing Home Network System of HYUNDAI TELECOM. Since this system is developed and produced by a technical team of HYUNDAI TELECOM and has various convenient functions, please read this Instruction Manual carefully before use so you can fully understand the use...

External structure and description - Installation drawing and wiring diagram Composition of product - Screen construction About calling option About security option 03 Size and specification Specification — Product warranty

External structure and description Installation drawing and wiring diagram If a power plug or an equipment connector applies as a blocking device, such device has to be in a location where it can be manipulated easily. Instruction Manual

This part contains matters that can result in a serious injury or even death. Please read and be fully aware of the contents for the correct use of the equipment. Any attempts of disassembly, repair, remodeling are prohibited. Do not use water or chemicals, such as alcohol, to wipe the outside of the product with but use a piece of dry cloth If there is any abnormal noise or smell or smoke coming out of the product, stop using it immediately and contact Service Center. Do not install the product in a place that is either hot or humid due to a heating equipment or such or gets direct...

This part contains matters that can result in an injury or a property damage. Please read and be fully aware of the contents for the correct use of the equipment. Do not place any equipments that generate strong magnetism (a large TV or speaker) near the product. Be careful not to have water get into a camera of a doorphone while cleaning the entrance. This product does not operate if a circuit breaker is shut down or in case of a blackout. Do not press buttons with a sharp object, such as an awl or a pin, or put such into the hole. Do not leave the equipment in a place where water drops or...

External structure and description Microphone LED for Away Mode (Red) Power LED(Blue) : It is used for a state of emergency. : It starts and ends a call when receiving a call. Open Door : It opens the door while making a call to a doorphone or the Lobby phone or making a call. Away Mode : It activates and inactivates Away Mode. Guard phone : It calls the guard phone. Speaker Power switch ※ Product image may differ by model and optional specification is included.

Installation drawing BACK BOX Wiring diagram Installation order 1. Bury Back Box in the wall at a height between 1400mm and 1500mm from the ground, adjusting its center. 2. Arrange and take out wires to be connected with the Set and fix a Wall Bracket on Back Box with a screw (M4X25, 2EA), adjusting angle. 3. Finish inner wiring work on HAS-R1041. 4. Put the Main Unit on two hooks on the Wall Bracket and align the Hole Center of "A" part with the Hole Center of HAS-R1041. 5. Fix on the Hole Center of "A" part with a screw (M3X10, 1EA). Door Phone 1. DP(Voice) 2. V+(Power) 3. V-(GND) " 5....

Wall Bracket Wall Bracket HCC-2000 Wire for master connection 8P(1EA) Wire for connecting door opening motion 5P(1EA) Wire for connecting a Door phone camera 4P(1EA) Wire for connecting a Lobby phone and the power of distributor 3P(1EA) Wire for connecting magnetic sensor 2P(1EA) Wire for connecting analogue guard phone(1EA) Wall Bracket

About calling option About security option If selecting BUS from BUS/STAR switch on the back of the product, you can call the lobby phone, guard phone in a digital way (485 communication) and selecting STAR, you can call the analogue guard phone. When changing the mode to BUS/STAR, you need to turn off the product and turn it back on. Instruction Manual

| Menu composition MENU Menu MANAGER SET SECURITY SET VOLUME SET VIDEO SET LANGUAGE SET Menu Function MANAGER SET Administrator only. SECURITY SET Delay setting and user’s password VOLUME SET Adjusting volume of bell and call VIDEO SET Adjusting brightness and color of screen LANGUAGE SET Selecting language

2. Security setting This menu is for setting of delay time on away mode and changing user’s password to inactivate away mode or disarm emergency mode. | Menu composition SECURITY SET XT DELAY TIME PSWD CHANGE MENU | Functions of each menu Menu DELAY TIME Function It can delay the detection of a sensor during the delay time if Away Mode is activated. Changing user’s password to inactivate away mode and disarm PSWD CHANGE emergency mode.

2. Security setting - Delay setting menu This menu is for setting the delay time. It can be set as 30 seconds up to 600 seconds and pressing Select button followed by a melody saves the setting. Menu composition DELAY SET MENU 30 SEC I Functions of side buttonMenu Function MENU Move to Top Menu. SELECT Setting and Cancelling for changing the delay time. UP Increasing the delay time. DOWN Decreasing the delay time.

Screen construction 2. Security setting - Password setting This menu is for changing user's password required for activating and inactivating Away Mode. * Enter the current password once. Enter a new password twice. * Touch button for Emergency, Away, Call, Open Door, guard phone at the bottom of the front side of the equipment are operated by pressing 1,2, 3, 4, and 5 when entering password. I Functions of side buttonMenu Function FRONT TOUCH BUTTON MENU Move to Top Menu SELECT Deleting one digit at a time when entering a password.

3. Volume setting This menu is for adjusting the volume of bell chiming a visit of a visitor and of call. The volume range of bell is between 1 and 3 and that of received call is between 1 and 4. The volume of bell is initially set as 2 and that of call is set as 2. Menu composition VOLUME SET +T RING VOLUME 2 TALK VOLUME 2 | Functions of each menuMenu Function MENU It is for moving Top Menu. It repeats selection and cancellation with a press and, once selected, a SELECT finger icon is fixed and the number changes its color to notify that it is changeable. UP It increases the volume of bell...