MultiLance Steam dispersion humidifier for extreme short absorption distances The HygroMatik MultiLance steam manifold systems are designed for use with extremely short absorption distances and are suitable for electrode and heater element steam humidifiers, as well as for steam injection systems. They can also be used with high flow velocities of up to 8 m/s in air ducts. The MultiLance systems can be installed vertically as well as horizontally in duct widths of 450 mm or above. Lance installation situation Supply pipe Steam Condensate Single lance profile Condensing forms on inside wall and is discharged 1 2 Special nozzles for dry aerosol free steam abstraction from central air stream 3 MultiLance systems are simple to install, maintenance-free and the high quality stainless steel components afford a long lifetime. Thanks to the special nozzle format the steam is obtained without aerosols from the middle of the lance, so that the downstream sensitive duct installations can be effectively protected from condensation. Your HygroMatik team will be pleased to answer any queries. Contact us at: +49 4193 895 - 0 / [email protected] www.hygromatik.com Dispersion tubes The speciality of the systems is that they can be individually assembled and completely dismantled. Therefore they can be individually adapted to the desired device geometry with maximum flexibility by HygroMatik. This also applies for special installation situations, both in front of and behind obstacles. Design capacity chart Dispersion tubes Supply pipe