SUBSURFACE HDL MLD ECO-ID TUBING FITTINGS MB AVR AFV IH RISERS PSE MPE RISERS DRIP ZONE MICRO SPRAYS RZWS Flow: 0.4, 0.6, 0.9 GPH Surface or Subsurface Irrigation: Gardens, Turf, Tree Rings, Green Walls, Irregular Spaces HUNTER DRIPLINE HDL-CV, HDL-PC, HDL-R FEATURES • Pressure-compensating emitters • Color-coded stripes to identify flow • Flow rates of 0.4, 0.6, 0.9 GPH • Emitter spacing at 12", 18", and 24" • Tubing diameter: 0.660" (OD) x .560" (ID) • Wall thickness 0.05" • Strong UV resistance • Stretch-wrapped 100', 250', and 500' coils make handling easy and efficient • Available without emitters (blank) • Emitter inlet filtration to prevent clogging • Extra-wide flow labyrinth prevents clogging • Full-size outlet pool and raised wall inhibit debris and roots from entering the emitter • Warranty period: 5 years (plus 2 additional years for environmental stress cracking) • Check valves keep the line charged up to 6' and prevent low-point drainage (HDL-CV only) OPERATING SPECIFICATIONS MICRO • HDL-CV: - Pressure-compensating, non-draining emitters - Operating pressure range: 15 to 60 PSI - Minimum filtration: 120 mesh; 125 microns • HDL-PC and HDL-R: - Pressure-compensating - Operating pressure range: 10 to 60 PSI - Minimum filtration: 120 mesh; 125 microns ► = Application Rate charts on page 171 HDL-06 = 0.6 GPH Flow HDL-09 = 0.9 GPH Flow HDL-BLNK = No Emitters CV=Pressure-compensating with check valve R = Reclaimed * Example: HDL-09-12-250-CV = 0.9 GPH check valve dripline with 12" spacing in a 250' coil Notes: * 100' coils available in the following HDL models only: HDL-06-12-100-CV, HDL-09-12-100-CV, HDL-09-18-100-CV, HDL-06-12-100-PC, and HDL-09-12-10-PC Coil with Stretch Wrap 134 Hunter' Visit hunterindustries.com