Hunter Douglas Wide Panel Ceilings enables the architect to design a closed ceiling with high performance aluminium or steel*-™ materials. In order to give maximum freedom in design there is a wide choice in panels with soft edges for a monolithic ceiling appearance or panels with square edges which results in a smooth ceiling with a narrow butt joint.

Wide Panel Impressive Size Impressive Panel DESIGN FLEXIBILITY EASY PLENUM ACCESS The robust wide panel appearance provides interesting possibilities for spatial room designing. The ceiling panels show a straight L-joint or a neat V-joint. The panels can be installed as Clip-in, Lay-on, Carrier or C-grid system. The 300 mm wide panels are available up to 6 m length. A range of colours and finishes are standard available and special colours upon request. The panels can be easily demounted by hand allowing easy and full access to services and installation in the plenum. DURABILITY Wide panel ceilings...

Our 300 mm wide panel ceiling system establishes a distinct, robust look. Panels span lengths up to 6 m, requiring fewer panels and joints to reduce installation cost. With two joint options and a variety of perforations for acoustical performance, our wide panels trim costs without trimming style. They are a quick way to make a big first impression. Material Specifications Hunter Douglas Architectural FIRE BEHAVIOUR Luxalon® metal suspended ceilings are classified according to EN 13501-1 as non-combustible and will therefore not contribute to possible fires. When ceilings however need to protect...

300C/300L Lay-OnPANELS 300C/300L Lay-On panels (1) are designed to be installed on wall angles. The panels are supported at their ends by wall angle profiles (2 & 3). The panels have straight upstands at the panel ends. When accessing the plenum the panels can be lifted and stacked onto adjacent installed panels to avoid having to lower the panels down to the floor. CONSTRUCTION DETAILS L or W steel edge profiles can be used as perimeters. A clear plenum space of 70 mm is required for installing and demounting the panels Requirements are based on using panels with a length of 2400 mm. Unit_300C/300L...

300C/300L Lay-On panels (1) designed to be installed on bandraster profiles (2). The panels have straight upstands at the panel ends. When accessing the plenum the panels can be lifted and stacked onto adjacent installed panels to avoid having to lower the panels down to the floor. 2 = bandraster profile (non-HD) 3 = wall bracket (non-HD) Panel type CONSTRUCTION DETAILS L or W steel edge profiles can be used as perimeters. DIMENSIONS & WEIGHTS Panels from 250-1000 mm are available on request. Weight based on 2400 mm panels including sub-structure. MATERIAL REQUIREMENT PER M2 Requirements are...

300C/300L CarrierPANELS The 300C/300L panels (1) can simply be fixed on the carrier (2) by hanging one side of the panel on the prongs of the carrier and pressing the other side with an upward movement. Integrated locking tabs onto the carrier can be used to lock adapter panels. This system is also available for exterior use. The panels are fixed to a carrier which allows for all panels to be removed individually. By pushing the panels up at the joint and by keeping simultaneous pressure on the panel edge the panels can be moved down from the carrier. Panel type CONSTRUCTION DETAILS 4 standard...

PANELS The system consists of C-grid sections installed unidirectional or in a grid pattern. The 300C/300L panels (1) have a flange on each side and are laid in between the C-grid sections (2). The suspension structure consists of exposed C-grid sections (2) which are installed parallel to each other to form a continuous main support. These are cross braced by primary angles (3) to ensure the spacing between the sections. A square grid system can be made by incorporating C-grid cross members that are butt joined against the main section. The cross connector (9) ensures a close fit at the junction...

300C Clip-InPANELS 300C Clip-In panels (1) are produced with notches (dimple points) in the panel ends to ensure a positive lock into the Clip-in profile (2). The Clip-In suspension system (2) consists of an A-shaped profile which is used both as the upper primary support as well as the Clip-in profile support. Panel type CONSTRUCTION DETAILS Hanger systems may be used, including the rapid hanger system which allows for a quick and accurate ceiling alignment. The standard range of Hunter Douglas steel edge profiles can be used as perimeters. MATERIAL REQUIREMENT PER M2 Requirements are based...

PERFORATION OPTIONS Panels can be supplied perforated with a 0 of 1.5 or 2.0 mm (open area of 23% and 16%). As a standard feature, perforated panels are supplied with a sound absorbing non-woven tissue glued into the panel for enhanced acoustical performance. 300C 300L Note: Panels have a nominal plain border of 8.5 mm along the longitudinal panel direction in order to assure maximum flatness and product stability. - Curve 1 as 300C/300L 0 2.0 mm perforated panels, provided with 0.2 mm thick, black non-woven acoustic tissue glued over the whole perforated area. Plenum depth is 400 mm. - Curve...

The tough and durable 2-layer polyester finish in a nominal thickness of 20 microns, is stove enamelled in a continuous coil-coating process ensuring uniform coating thickness and absolute adhesion. The standard Hunter Douglas interior and exterior colour range for 300C/300L includes several different colours and finishes. See colour chart. Any other (RAL or NCS) colour is available on request. As a member of the Technical Association of Industrial Metal Ceiling Manufacturers (TAIM), Hunter Douglas complies with tolerance criteria as specified in chapter 4 of the TAIM Quality standards for metal....

HUNTER DOUGLAS ARCHITECTURAL In the last 60 years, we have been fortunate enough to help turn countless innovative ideas into products for innovative buildings. With major operation centres in Europe, North America, Latin America, Asia and Australia we contribute to thousands of high-profile projects including shopping centres, airports, government offices, hospitals, universities and offices. ▲ CEILINGS ▲ SUN LOUVRES ▲ FAQADES ARCHITECTURAL SERVICES We support our business partners with a wide range of technical consulting and support services for architects, developers, and installers. We assist...