Luxalon® Exterior Ceilings by Hunter Douglas in special aluminium alloy attached to rigidly suspended carriers ensure durability and withstand severe conditions. Allowing a wide range of design possibilities exterior ceilings are specially developed with the same aesthetic appearance as the Luxalon® Interior Ceilings. HunterDouglas ®Architectural

Exterior Ceilings Flexible durability A PROVEN SYSTEM Hunter Douglas’ Luxalon® Exterior Ceiling system is specially developed to withstand the strongest weather influences. Tested by TNO, an independent testing and research institute in the Netherlands, these ceilings are guaranteed to impress with their durability and design for many years after installation. The ceiling panels are roll formed from pre-painted, stove-enamelled aluminium strip made from an alloy that is excellent for exterior applications. The Luxalon® Exterior Ceiling system appears in many different applications including overhanging...

EASY PLENUM ACCESS The Luxalon® system allows for easy (de)mounting of ceiling panels. Installed on a concealed suspension system, each panel and infill can be removed and replaced by hand, allowing easy and full access to services and installations in the plenum. Edge solutions Luxacote® Finish Luxalon® Profix™ Maximum Spans Material Specifications For detailed information please see our website, www.hunterdouglasarchitectural.eu Hunter Douglas Archtectural 31 Production by Hunter Douglas Ceiling Cent

The Luxalon® 30BD Exterior Ceiling system consists of box-shaped panels (1) which can be easily clipped on a 30BD carrier (2). Panels can be joined by using the panel splice (8). Between the panels there is an open joint of 20 mm with locking clips, alternatively a closed joint with recessed U- or V-join profile. The panel carrier (2) is black and is provided with prongs to accommodate the panels in a standard module of 50 mm. Carriers have a standard length of 5000 mm. Luxalon® ProFix™ cantilever carrier span panel span panel cantilever Luxalon® ProFix™- carrier span screw washer ProFix™ carrier...

PANELS The Luxalon® 30BXD Exterior Ceiling system consists of box-shaped panels (1) which can be easily clipped on a 30BXD carrier (2). Panels can be joined by using the panel splice (8). Between the panels there is an open joint of 20 mm with locking clips, alternatively a closed joint with recessed U- or V-join profile. The panel carrier (2) is black and is provided with prongs to accommodate the panels in a standard module of 50 mm. Carriers have a standard length of 5000 mm. A = Luxalon® ProFix™ cantilever B = carrier span C = panel span D = panel cantilever E = Luxalon® ProFix™-carrier span...

PANELS The Luxalon® 84R Ceiling system consists of round edged panels (1) which can be easily clipped on a 84R carrier (2). Panels can be joined by using the panel splice (8). Between the panels there is an open joint of 16 mm, which can be filled with a 16 mm wide flush join profile (9a) to form a flush closed ceiling appearance or a recessed joint (9b). Join profiles can be simply inserted by hand, without using any tools. SUSPENSION The panel carrier (2) is black and is provided with prongs to accommodate the panels in a standard module of 100 mm. Carriers have a standard length of 5000 mm....

PANELS The Luxalon® 80B/84B Ceiling system consists of box shaped, 80 mm/ 84 mm wide aluminium panels (1) which can be easily clipped on the 80B/84B carrier (2). Panels can be joined by using the panel splice (8). Between the 80B panels there is an open joint of 20 mm, which can be filled with a recessed U-shaped infill profile (9). Between the 84B panels there is an open joint of 16 mm. The carrier (2) is black, and provided with prongs to accommodate the panels in a module of 100 mm. Carriers have a Luxalon® ProFix™ cantilever carrier span panel span panel cantilever Luxalon® ProFix™-carrier...

The Luxalon® 84C Closed Ceiling system consists of box shaped panels (1) which can be easily clipped on a 84C carrier (2). The 84 mm wide panels feature a 24 mm wide flange that closes-off the 16 mm joint between the panels (module 100 mm). The 12.5 mm deep recessed joint gives a linear direction to the ceiling plane whilst being closed-off from the plenum. The panels are made to measure and can be supplied in any length up to 6000 mm. The panel carrier (2) is black and is provided with prongs to accommodate the panels in a standard module of 100 mm. Carriers have a standard length of 5000 mm....

The Luxalon® Closed Ceiling system has a choice of three widths of panels (1). All three widths can be combined and easily clipped on a universal carrier (2). Panels can be joined by using the panel splice (8). Locking clips (9) for 150C and 225C are fitted crosswise on to the carrier, on top of the prongue in order to fully secure the panels and to create a ceiling able to withstand windloads. The panel carrier (2) is black, made of 0.95 mm thick stove enamelled aluminium and is provided with prongs to accommodate the panels in a width of 75, 150 or 225 mm. Carriers have a standard length of...

300C/300L CarrierPANELS The Luxalon® 300C/L Panels (1) are 300 mm wide and have resp. a V-joint or L-joint. All panels can simply be fixed on the carrier (2) by hanging one side of the panel on the prongs of the carrier and by then pressing the other side in place with an upward movement. An uncluttered monolithic ceiling appearance is achieved using the concealed 300C/300L carrier suspension system. The panels do not require any locking clips. The panel carrier is black, made of 0.95 mm thick aluminium and is provided with prongs to accommodate the panels. Carriers have a standard length of...

The Luxalon® 150F/200F Ceiling system consists of 150 mm or 200 mm wide aluminium panels (1) which can simply be clipped into the prongs of a 150F or a 200F carrier (2). The panels can be joined by using the panel splice (8). The carrier (2) is black, made of 0.95 mm thick (for 150F) or 1.2 mm thick (for 200F) stove enamelled aluminium and is provided with prongs to accommodate the panels. Carriers have a standard length of 5000 mm and are connected by using the carrier splice (200F) or by sliding the ends of the carriers into each other (150F). Luxalon® ProFix™ cantilever carrier span panel...