*myarchiexpo

Catalogs
Huesker
HaTelit® BL

HaTelit® BL

Product catalog summary

Introduction
HaTelit® BL is a self-adhesive reinforcement grid developed by HUESKER for the rehabilitation of asphalt and concrete pavements. It is particularly effective for repairing small areas and individual cracks, offering a solution that extends the service life of roads and pavements.

Product Specifications
HaTelit® BL is made from high-modulus polyester yarn laminated with a bitumen sheet. This composition allows it to retard reflective cracking actively, seal surfaces, and relieve stresses caused by temperature changes and traffic loads.

Applications

Repair of cracks in asphalt pavements
Ideal for small areas up to 500 m²
Targeted repair of individual cracks

Benefits

Proven track record in asphalt pavement rehabilitation
Reduced site operations and lower plant requirements
Straightforward installation with on-site roll cutting
Extension of pavement service life
Reduction in maintenance costs

Technical Features

Self-adhesive for fast installation
Strong bond with asphalt due to >50% bitumen content
No need for additional bitumen emulsion spraying
Reinforcing and stress-relieving functions

Installation Procedure

Position the HaTelit® BL roll over the crack or joint.
Unroll 50 cm and peel off the release film.
Apply the exposed bitumen backing to the base and press down.
Unroll the grid and press down using a broom or roller.
Cut off the grid at the end of the section with a sharp knife.

Contact Information
For more details, visit HUESKER's website or contact them directly at their office in Gescher, Germany.

Catalog excerpts

Asphalt Reinforcement with HaTelit® BL Self-adhesive Reinforcement Grid for Rehabilitation of Asphalt and Concrete Pavements

Open the catalog to page 1

HaTelit® BL: Product of choice for repair of small areas and individual cracks HUESKER's asphalt reinforcement grids are used to rehabilitate asphalt and concrete pavements. HaTelit® BL, a further development of our triedand-tested HaTelit® reinforcement grid, is particularly suitable for repairing small areas and individual cracks. Made from high-modulus polyester yarn laminated with a bitumen sheet, the flexible, high-tensile, self-adhesive grid contributes to the active retardation of reflective cracking. In addition to its reinforcing action, HaTelit® BL – through the bonded bitumen backing...

Open the catalog to page 2

Technical features of HaTelit® BL • Self-adhesive, allowing fast and straightforward installation • Direct laying on level or milled base • Strong bond with asphalt due to bitumen content of the grid coating > 50% • No need for additional spraying with bitumen emulsion (Layer thickness equivalent to approx. 1 kg bitumen per m2) • Reinforcing and stress-relieving function Simple installation in only five steps: Place HaTelit® BL roll in correct position for unrolling (over middle of crack or joint). Unroll approx. 50 cm of sheet and carefully peel off release film, gently pulling the self-adhesive...

Open the catalog to page 3

02/14 B Copyright by HUESKER Synthetic GmbH, Gescher Further Information:

Open the catalog to page 4

All Huesker catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list