DR65A3000
2Pages

{{requestButtons}}

Catalog excerpts

DR65A3000 - 1

DR65A3000Ventilating Dehumidification System SPECIFICATION DATA DR65 Capacities and Performance Part Number: DR65A3000 Blower: 160 CFM @ 0.0 in. WG Energy 2.22 liters (4.7 pints) per performance: kilowatt hour (KWH) Energy Operating Temp Range (outside cabinet): 34 - 135 °F (1.1 - 57.2 °C) Capacity: 34 pints/day (60 °F [15.6 °C], 60 %RH) 47 pints/day (70 °F [21.1 °C], 60 %RH) 65 pints/day (80 °F [26.7 °C], 60 %RH) Coverage: Up to 1800 sq. ft. Duct Connections: 8 in. Round Inlet 8 in. Round Outlet (ABS Plastic) Filter Efficiency: Drain Connection: threaded Standard MERV-11 3/4 in. threaded female NPT, with attached 3/4 in. male NPT Length: 28-1/2 in. (with collars) Shipping Specs Width: Height: Length: Weight: Optional Parts Replacement Filter 50049537-005 Motorized Ventilation Damper EARD6 Bypass Damper CPRD8/U Honeywell Whole-House Dehumidifiers are designed to help maintain proper humidity levels in the home. Lower humidity levels feel more comfortable, and helps safeguard against problems from excess moisture in the home such as mold, mildew, warped wood, peeling of paint, or musty odors. Honeywell Whole Home Dehumidification Systems are Energy Star rated, providing efficient and economical operation. Dehumidification The Honeywell DR65A3000 dehumidifier utilizes refrigeration and internal air circulation to cool the incoming air stream below its dew point. Water condenses and drains off the coil, sending drier air back into the house. • Can remove up to 65 pints/day of moisture. • Energy Star rated • Integrated set and forget humidistat • Side ducted exhaust • Reduced noise during operation Ventilation The Honeywell DR65A3000 has a separate control for ventilation, so the powerful onboard blower can be used to efficiently bring fresh air into the house even when dehumidification is not needed. ETL listed per UL474 and CSA 22.2 No. 92 Energy Star rated For more information call 1-800-468-1502 or visit our website at customer.honeywell.com. Simplified Wiring The Honeywell DR65A3000 has an onboard dehumidistat that allows the unit to run without any additional wiring. In addition, Honeywell dehumidifiers can be controlled by a variety of 24-volt remote wired and wireless controls. The DR65A3000 allows the use of a 24V normally closed float switch or water sensor to simplify installation in a drain pan. This will allow the external float switch to kill power to the compressor in the event of water blockage.

Open the catalog to page 1
DR65A3000 - 2

Installation Recommendations and Options Dedicated Return to Main Supply Ideal when… • Access to a dedicated central return for DR65A3000 is available. • Combined with A/C operation; requires backdraft damper on the exhaust port to minimize backdraft when DR65A3000 is not on but A/C is. DEHUMIDIFIER SEPARATE RETURN (OPTIONAL) GRAVITY DAMPER BACKDRAFT DAMPER Main Return to Main Supply Ideal when… • Running DR65A3000 when not running A/C. Requires damper on the exhaust port to minimize backdraft when DR65A3000 is not on but A/C is. • Access to a dedicated central return for DR65A3000 is not...

Open the catalog to page 2

All Honeywell catalogs and technical brochures

  1. DR90A3000

    2 Pages

  2. HE360A

    24 Pages

  3. C7189R

    20 Pages

  4. DR120A3000

    2 Pages

  5. RTH9585

    76 Pages