The next generation of V-Plex® PIR and Microwave motion sensors, based on the award-winning passive infra-red IS3000 and the DUAL TEC® DT8000, features simple installation, superior detection, and minimal false alarms. V-Plex Motion Sensors are compatible with Honeywell control panels that support V-Plex devices including Honeywell’s MAXPRO® Intrusion Control Panel Series and use two‑wire loop technology to save you time and money. V-PLEX PATENTED POLLING LOOP TECHNOLOGY By using two wires instead of four, V-Plex offers significant advantages over peer-topeer wiring or the conventional four-wire multiplex. For example, since each sensor can be installed using only two wires for both power and data, you spend less money on wiring. V-Plex devices also draw minimal amounts of current, therefore requiring fewer auxiliary power supplies. DESIGNED FOR FASTER INSTALLATION The mounting screw pre-drill collars and retention features, removable connector blocks for easy access, and patented flashlight walk test make installation fast, reducing labor costs and enabling you to move on to the next job quicker. FEATURES AND BENEFITS • HIGH DETECTION COVERAGE Extremely dense, wide, and long detection coverage compared to similar products in the market. • MIRROR OPTICS Mirror optics provide the most reliable technology, offering the best detection/ false alarm ratio. • EMOVABLE TERMINAL STRIP R Our easy-access, removable connector provides flexible wiring and easier mounting during installation. • IGITAL ADAPTIVE MICROWAVE D THRESHOLDS The Dual Tech sensors digitally adjust thresholds to account for room disturbances, such as ceiling fans and other repetitive moving objects. The result is excellent false alarm immunity even in “active” rooms. • UPERIOR IR ANTI-MASK S PROTECTION Highly sensitive, active infrared antimasking feature can easily detect blocked, sprayed, or obstruction attempts to disable the detector. • IR WHITE LIGHT IMMUNITY P A patented black bug guard reduces false alarms by providing 6,500 lux of white light immunity. This helps reduce false alarm problems caused by lights, flashlights, or reflective objects. • ELECTABLE LOOK-DOWN ZONE S Provides better coverage up close with multiple zones in the look-down area. • LASHLIGHT WALK TEST F Reduces installation time as the walk test can be enabled by simply waving a flashlight at the detector and it automatically times itself out. • DVANCED DUALCORE SIGNAL A PROCESSING (DUAL TEC SENSORS) Supports a multitude of advanced functions, including concurrent diagnostics, digital fluorescent light interference filter, digital adaptive microwave threshold, adaptive baselines, and bidirectional temperature compensation. • ALSE ALARM IMMUNITY F The PIR and Dual Tech sensors are designed to meet false alarm standards including NF&A2P two shields and EN50131-2-2 or EN50131-2-4. Microprocessor controls help filter out real signals from false sources. • UICK AND EASY INSTALLATION Q Integrated screws, adjustable mounting slots and a rotating mountain height adjustment dial (DT8320 only) enable a quick and easy installation for nearly all surfaces and ceiling heights. • LEXIBLE MOUNTINGS F The V-Plex sensor family mounts on walls, in corners or on ceilings, with heights from 2.1m - 2.7m (6.9' - 8.9'). DT8320 Ceiling Mount sensor allows a mounting height of 2.4m (8') to 8m (26') with a max

V-PLEX MOTION SENSORS Specifications IS3016A-SN, IS3016M-SN, DT8016AF5-SN, DT8016MF5-SN 36 long range, 10 intermediate, 12 lower, 2 look-down 36 long range, 10 intermediate, 12 lower, 2 look-down 36 long range, 10 intermediate, 12 lower, 2 look-down 36 long range, 10 intermediate, 12 lower, 2 look-down Type of detection Range Detection zones Microwave frequency Power requirements 9.0 - 13V PK-PK; at polling loop terminals, 3 mA maximum 9.0 - 13 V PK-PK at polling loop terminals; 2.5 mA maximum 9.0 - 13V PK-PK at polling loop terminals; 4 mA maximum. 9.0 - 13V PK-PK; at polling loop terminals,...

V-PLEX MOTION SENSORS Specifications Cover and Wall; (NC with cover installed) Form A; 30 mA, 25 VDC; Magnetic field Cover and Wall; (NC with cover installed) Form A; 30 mA, 25 VDC; Magnetic field Advanced Dual Slope Advanced Dual Slope Relative humidity PIR white light immunity EN50131-2-4:2008, Security Grade 3, Environmental Class II, NF&A2P three shields EN50131-2-4:2008, Security Grade 2, Environmental Class II, NF&A2P two shields Type of detection Range Microwave frequency RFI immunity Mounting height Power requirements Operating temperature Temp. compensation Approved listings

ORDERING PIR MOTION DETECTORS IS3016A-SN V-Plex PIR Motion Detector with Anti-Mask, 16m x 22m V-Plex PIR Motion Detector, 16m x 22m DUAL TEC MOTION DETECTORS DT8016AF5-SN V-Plex DUAL TEC Motion Detector with Anti-Mask, 16m x 22m V-Plex DUAL TEC Motion Detector, 16m x 22m V-Plex DUAL TEC Ceiling Mount Motion Detector with Mirror Optics and Anti-Mask V-Plex DUAL TEC Ceiling Mount Motion Detector with Mirror Optics ACCESSORIES WALL MOUNTED SMB-10* (P/N 0-000-110-01) Swivel Mount Bracket Swivel Mount Ceiling Bracket Swivel Mount Bracket with Tamper Coverage Pattern Masking Set (4 x 60° masks) For...