The ULTRAKeyٙ represents an entirely new approach to intelligent, user-friendlycontrol of CCTV management systems.Designed to take full advantage of the powerful features of Honeywell Video SystemsMAX-1000 video management system, MXSYSO4E Ethernet system controller and KSX32080 small system CCTV matrix switcher, theULTRAKey incorporates a large back-lit touch-screen LCD. The LCD may beconfigured with hundreds of menus, up to 8,000 buttons and 999 keycodes. Menusare accessed dynamically based on either hard-key or soft-key selection.This unique method of operation ensures that any menu may be accessed quicklyand intuitively, with minimal keystrokes. The result is unparalleled control and ease-of-use for operators, thus, significantly reducing training requirements, and vastlyimproving operator efficiency and response times. Utilizing multiple control interfaceoptions RS-232, RS-485 and TCP/IP, selection and control of any function within theCCTV management system is available directly from the ULTRAKey controller.Dedicated hard keys are provided for common selections including: alternatecamera selection, PTZ call, sequence selection, tours, multiplexer selection andcontrol, recorder selection, function, review, print, dub, alarm acknowledge, VCRand DVR control functions. Selecting any of these keys will execute a function ordynamically select a menu on the LCD touch-screen.Two jog/shuttle controls are provided. The uppermost jog shuttle may be used forcontrol of recording devices or other peripheral equipment, while the centrallymounted jog shuttle may be used for stepping through camera lists.The rate-proportional joystick allows control of any variable speed pan/tilt/zoommechanism. The joystick is centrally located on the keyboard, suiting right- or left- handed operators, and incorporates integral zoom controller. The ULTRAKey alsoincorporates a soft, rubber wrist rest that significantly reduces operator fatigue. Features: > ΕFully programmable with customizedmenusIntegral back-lit LCD touch screenՕComplete MAX-1000 compatibilityErgonomic design with padded wrist restՕVariable-speed joystick with integralzoom control Multiple interface options (RS-232, RS-485 and TCP/IP)ՕTwo jog/shuttle controls Dedicated keys for commonly used functionsՕDynamic menu selectionAll programming stored in flash RAM size="-1">

Input Voltage: 10-16VDC Power: 10 Watts Control: Elastomeric push-button switches, 320x240 graphics LCD with touch-screen-Proportional 3-axis joystick, 2 Jog/Shuttle switches, and LCD Pan/Tilt Functions: Rate-proportional pan left, pan right, tilt up, tilt down Lens Functions: Zoom in, zoom out, focus near, focus far, iris open, and iris close Control Ports: COM1 - RJ-12 connector (RS-485 only) COM2 - RJ-12 connector (RS-485) or 10BaseT Ethernet RJ-12 connector (RS-232) COM3 - DB-9 connector (RS-232 only) Keyboard Port: 6-pin mini-DIN for QWERTY keyboard Communication Speeds: 9600 to 38.4K baud...