CO8M
2Pages

Catalog excerpts

CO8M Wireless Carbon Monoxide Detector The CO8M is a Carbon Monoxide (CO) alarm device. The front panel is fitted with lights to indicate alarm, operation, fault, test and diagnostic conditions. The CO8M uses a proven electrochemical sensor which has been individually calibrated and tested in Carbon Monoxide (CO) gas to ensure accuracy. When dangerous levels of Carbon Monoxide are detected, the siren will sound and the red alarm light will flash to indicate an alarm status. The aesthetically pleasing design can be easily secured to a wall or ceiling. If Carbon Monoxide(CO) gas is detected while the home owners or tenants are absent, the memory feature will record the event. This is a very important safety feature. An easy to use Test/Hush button allows the user to check that the siren, electronics and sensor are working. It can also be used to silence the system if required and is safe to do so. The test button, when pressed, will check the siren, battery, electronics and sensor. When in alarm, pressing the test button will silence the siren for a period of 4 minutes. If the Carbon Monoxide concentration is > 150 ppm, the alarm will not be silenced by this action. For more information on this and other products in Honeywell’s wireless range, please visit www.honeywell.com/security/uk/safety Features • The CO8M detects dangerous levels of • Completely wireless, which greatly Carbon Monoxide (CO) and gives an reduces installation time and maximizes audible and visual alarm placement options • Carbon Monoxide (CO) alarm levels detected while absent will be recorded in memory • Compatible with Domonial and Galaxy panels • Local and remote notification when end of life • 100% gas tested which eliminates any potential non-functional units • Proven 6-year life sensor • Front panel light indicators • Loud distinct alarm (85 dB(A) minimum at 3 metres) • Kitemarked to BS EN 50291-1:2010 • Large, easy to use Test/Hush button • Sealed Lithium ba

Open the catalog to page 1

CO8M Wireless Carbon Monoxide Detector Specifications Electrochemical - up to six year life (expiration date mentioned on the product) >43ppm : 1 flash every 2 seconds and sounder “On” within 72 minutes approx. >80ppm : 1 flash every second and sounder “On” within 18 minutes approx. >150ppm : 2 flashes every second and sounder “On” within 40 seconds approx. Test Button Checks electronics, batteries, siren and sensor Memory Feature Records if a previous alarm threshold has been exceeded Indicator Lights Power-On Alarm Fault Test / Diagnostic Alarm Siren Domonial: From I01 version onwards...

Open the catalog to page 2