*myarchiexpo

HmIP-DRSI1

Product catalog summary

Overview
The Homematic IP Switch Actuator for DIN rail mount, model HmIP-DRSI1, is a compact device designed for smart home applications. It allows for the switching of a single channel from a distribution cabinet and is ideal for replacing traditional impulse switches. The actuator can be controlled via standard 230 V push-buttons, wirelessly through Homematic IP devices, or via a smartphone app.

Key Features

Dual Functionality: Acts as both a switch actuator and a replacement for conventional impulse switches.
Easy Installation: Features spring-loaded terminals for easy connection to cables, with an illuminated display and device buttons for function and cabling checks.
Flexible Operation: Can be controlled wirelessly or manually, with support for time profiles and existing wired push-buttons.
Smart Home Integration: Suitable for building expansions and retrofitting without altering existing room installations. Compatible with Homematic IP Access Point and third-party solutions.

Package Contents

Homematic IP Switch Actuator for DIN rail mount – 1 channel
User manual

Technical Specifications

Supply Voltage: 230 V~/50 Hz
Standby Power Consumption: 300 mW (display lights off)
Relay: NO contact, 1-pole, bistable
Switching Voltage: 230 V~
Current Carrying Capacity: 10 A
Cable Type and Cross Section: Rigid and flexible cable, 1.5-2.5 mm²
Installation: On a DIN rail according to EN 60715
Degree of Protection: IP20
Ambient Temperature: -5 to +40 °C
Dimensions: 18 x 90 x 69 mm
Weight: 81 g
Radio Frequency Band: 868.0-868.6 MHz, 869.4-869.65 MHz
RF Range: 300 m in open area

Load Compatibility
The device supports various connected loads, including:

Ohmic loads (10 A)
Incandescent lamps (1500 W per channel)
Self-ballasted lamps (LED/compact fluorescent) (200 W)
HV halogen lamps (1500 W)
LV halogen lamps with electronic or iron core transformers (1500 W)
Fluorescent lamps (1500 W)
Electronic radiators and electric heating systems (8 A, 200,000 switching cycles)

Catalog excerpts

HIGH FUNCTIONALITY IN THE SMALLEST SPACE Switch Actuator for DIN rail mount – 1 channel HmIP-DRSI1 The narrow switch actuator with a width of only 1 WM can easily be installed on a DIN rail to switch a channel from the distribution cabinet. Therefore, the device is ideal to replace trigger impulse switches. It is controlled directly via standard 230 V push-buttons, wirelessly via Homematic IP push-buttons or remote controls, and even via the smartphone app at any time. Smart Living, Simply Exciting.

Open the catalog to page 1

Connection of different loads (outputs): Connection of push-buttons/switches (inputs): SUITABLE FOR MANY CONNECTED LOADS ohmic loads (10 A) incandescent lamps (1500 W per channel) self-ballasted lamps (LED/compact fluorescent lamp) (200 W) HV halogen lamps (1500 W) LV halogen lamps with electronic transformer or iron core transformer (1500 W) fluorescent lamps uncompensated or parallel compensated (1500 W) electronic radiators and electric heating systems (8 A, 200,000 switching cycles) TWO FUNCTIONS IN ONE DEVICE Not only does the switch actuator enable convenient switching of connected lights...

Open the catalog to page 2

HmIP-DRSI1

HmIP-DRSI1

Catalog excerpts

All Homematic IP by eQ-3 catalogs and technical brochures