*myarchiexpo

Catalogs
HOMAPAL GmbH
HOMAPAL® SRM SCRATCH RESISTANT MATT

HOMAPAL® SRM SCRATCH RESISTANT MATT

Product catalog summary

Overview: The HOMAPAL® SRM Scratch Resistant Matt Technical Data Sheet outlines specifications and guidelines for metal decors in decorative laminates, designed for indoor use with resistance to scratching, staining, and surface wear.

Specifications: Available in aluminium and copper finishes with UV lacquer, the laminates come in sizes of 2440 x 1220 mm and 3050 x 1220 mm, with thicknesses from 0.8 mm to 1.3 mm. Weight ranges from 1.3 kg/m² to 2.1 kg/m². Tolerances for dimensions are specified, and they are unsuitable for postforming or rolling.

Performance Characteristics: The laminates withstand temperatures up to 80°C short-term, have a light fastness of at least 4 on the grey scale, and show high resistance to staining and scratching, with a minimum initial abrasion point of 150 revolutions.

Application Areas: Intended for indoor use both vertically and horizontally, not recommended for wetrooms. SRM lacquering enhances resistance to scratching, surface wear, and staining.

Processing and Handling: Use suitable adhesives, avoiding water-based options. Surfaces should be kept clean during processing. Laminates can be sawn, drilled, and milled with carbide-tipped tools recommended.

Storage and Conditioning: Store in a closed environment away from moisture and UV radiation, maintaining 18-25°C and 50-60% relative humidity.

Care and Cleaning: Use a soft, lint-free cloth with mild cleaning agents, avoiding strong alkaline or acidic cleaners and abrasives.

Important Notes: Each laminate is unique due to handcrafted designs, especially in copper and brass. Ensure processing in the same running direction for appearance consistency.

Introduction: This document provides technical specifications and handling guidelines for HOMAPAL® SRM metal laminates, including recommendations for processing, storage, balancing, fire and explosion protection, and environmental and health aspects.

Specifications and Handling: Retain protective foil during processing to prevent damage. Avoid prolonged light exposure to the foil. Store laminates within ±10°C of specified temperatures and horizontally or at an incline with full support.

Balancing: To prevent stress, substrates should be covered on both sides with materials reacting similarly to heat and moisture. Symmetrical construction and uniform adhesive application are crucial, especially for substrates thinner than 13 mm.

Fire and Explosion Protection: HOMAPAL® SRM laminates have normal flammability and can be extinguished with carbon dioxide, water jet, or dry foam. Manage dust with standard safety precautions and adequate ventilation.

Environmental and Health Aspects: Laminates are not hazardous, do not contain pentachlorophenol, are physiologically harmless, and do not fall under the REACH Regulation.

Conclusion: Guidelines are based on current knowledge and experience but do not replace individual testing. Users should consult technical advice services if in doubt and comply with all relevant laws and regulations.

Catalog excerpts

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 401/229 SRM Copper Crush Stipple SRM Weight [kg/m²] Surface Material: Finish: Aluminium UV-Laquer Copper UV-Laquer Copper UV-Laquer Aluminium UV-Laquer Aluminium UV-Laquer Tolerances Thickness: Length: Width: Flatness: at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² Light fastness (EN 4382:2019, section 27) Resistance to scratching (EN 438-2:2019, section 25): Resistance to surface wear (EN 438-2:2019, section 10): Revolutions (min.) Initial abrasion point Resistance to staining (EN 438-2:2019, section 26): HOMAPAL GmbH | Bahnhofstraße 30/32 | D-37412 Herzberg am Harz | T +49 (0) 5521-856-0 | F +49 (0) 5

Open the catalog to page 1

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 439 SRM Alu Crossbrushed Brownish Grey SRM Weight [kg/m²] Surface Material: Finish: Aluminium UV-Laquer Aluminium UV-Laquer Aluminium UV-Laquer Aluminium UV-Laquer Aluminium UV-Laquer Tolerances Thickness: Length: Width: Flatness: at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm²...

Open the catalog to page 2

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 454 SRM Alu Brushed Rosé Gold SRM 456 SRM Alu Brushed Medium Bronzetone SRM Weight [kg/m²] Surface Material: Finish: Tolerances Thickness: Length: Width: Flatness: at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² Light fastness (EN 4382:2019, section 27) Resistance to staining...

Open the catalog to page 3

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 690/340 SRM Copper Diamond Antique SRM 695D SRM Copper Stratos Diagonal SRM Weight [kg/m²] Surface Material: Finish: Copper UV-Laquer Brass UV-Laquer Aluminium UV-Laquer Copper UV-Laquer Copper UV-Laquer Tolerances Thickness: Length: Width: Flatness: at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max....

Open the catalog to page 4

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS Weight [kg/m²] Surface Material: Finish: Aluminium UV-Laquer 001 SR or front decor Tolerances Thickness: Length: Width: Flatness: at max. temperature of 60° C and max. pressure of 0,3 N/mm² at max. temperature of 60° C and max. pressure of 0,3 N/mm² Light fastness (EN 4382:2019, section 27) Aluminium UV-Laquer APPLICATION AREAS Only use indoors, vertically and horizontally. The use in wetrooms is only possible to a limited extent, we cannot recommend it. The SRM lacquering provides properties to the surface according EN...

Open the catalog to page 5

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 401/229 Copper Crush Stipple SRM 439 SRM Alu Crossbrushed Brownish Grey SRM 454 SRM Alu Brushed Rosé Gold SRM 456 SRM Alu Brushed Bronzetone Medium SRM 500/340 SRM Brass Diamond Antique SRM 690/340 SRM Copper Diamond Antique SRM 695D SRM Copper Stratos Diagonal SRM GENERAL INFORMATION HOMAPAL® SRM is a decorative laminate with a surface material consisting of a thin metal layer. The metal layer is protected by a thin UV-laquer finish. Note: The kraft paper core layers are impregnated with phenol-formaldehyde resin. The HOMAPAL®...

Open the catalog to page 6

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 401/229 Copper Crush Stipple SRM 439 SRM Alu Crossbrushed Brownish Grey SRM 454 SRM Alu Brushed Rosé Gold SRM 456 SRM Alu Brushed Bronzetone Medium SRM 500/340 SRM Brass Diamond Antique SRM 690/340 SRM Copper Diamond Antique SRM 695D SRM Copper Stratos Diagonal SRM Protection Plate STORAGE AND CONDITIONING As with standard HPL products, HOMAPAL® SRM metal laminate must also be stored in a closed storeroom protected against moisture and UV radiation. Storage should be in a standard climate, i.e. approx. 18-25°C and 50-60%...

Open the catalog to page 7

HOMAPAL® SRM SCRATCH RESISTANT MATT TECHNICAL DATA SHEET // METAL DECORS 401/229 Copper Crush Stipple SRM 439 SRM Alu Crossbrushed Brownish Grey SRM 454 SRM Alu Brushed Rosé Gold SRM 456 SRM Alu Brushed Bronzetone Medium SRM 500/340 SRM Brass Diamond Antique SRM 690/340 SRM Copper Diamond Antique SRM 695D SRM Copper Stratos Diagonal SRM FIRE AND EXPLOSION PROTECTION DATA IGNITION TEMPERATURE FLASH POINT THERMAL DECOMPOSITION Possible above 250°C. Toxic gases (carbon monoxide, carbon dioxide) can be generated depending on the fire conditions (temperature, oxygen content, etc.). HOMAPAL® SRM metal...

Open the catalog to page 8

HOMAPAL® SRM SCRATCH RESISTANT MATT

HOMAPAL® SRM SCRATCH RESISTANT MATT

Catalog excerpts

All HOMAPAL GmbH catalogs and technical brochures

Archived catalogs