*myarchiexpo

Catalogs
HOMAPAL GmbH
ALU BRUSHED ELEMENTS

ALU BRUSHED ELEMENTS

Product catalog summary

Overview: This document provides detailed specifications and guidelines for Homapal® Metal Decors, focusing on Alu Brushed Elements. It includes product specifications, processing instructions, storage recommendations, and safety information.

Product Specifications:

Finishes: Bronzetone, Coppertone, Natural, Stainless Steeltone, Goldtone.
Sizes: 2440 x 1220 mm, 3050 x 1220 mm, 3050 x 1300 mm; Thickness: 0.8 to 1.0 mm.
Weight: 1.1 to 1.3 kg/m².
Material: Aluminium with epoxy finish.
Tolerances: ±0.20 mm thickness, +10 mm/-0 mm length and width.
Not suitable for postforming; max processing temperature 60°C, pressure 0.3 N/mm².
Short-term max temperature 80°C; rollable, bending radius group 4.

Processing and Application:

Adhesives: PVAC glue, two-component, neoprene contact adhesives; avoid urea bonding adhesives.
Process with standard HPL techniques; use carbide-tipped tools.
For indoor and vertical use; limited horizontal and damp room applications.

Storage and Conditioning:

Store in a closed environment, 18-25°C, 50-60% humidity, protected from moisture and UV.
Store panels flat or inclined with full support; condition materials for 48 hours before use.

Safety and Fire Information:

Difficult to ignite, delays flame spread; use CO2, water jet, or dry foam for fire.
Ensure ventilation during processing; dust explosion limit below 30 mg/m³.

General Notes:

Appearance may vary; use same batch for consistency.
Remove protective foil before processing.

Transport and Health Aspects: Not classified as hazardous; no toxic effects, PCP-free.

Environmental and Safety Information: Safe for food contact, low formaldehyde emissions, REACH regulations not applicable.

Fire and Explosion Protection: Fire reaction tested per EN 13501-1; compliance testing by composite manufacturer.

IMO Certification: Complies with Marine Equipment Directive (MED); confirm certification with Homapal.

General Recommendations: Specifications based on current knowledge; suitability tests and legal compliance are the processor's responsibility.

Product Variants: Available in various finishes, including special or industrial quality.

Catalog excerpts

HOMAPAL® METAL DECORS TECHNICAL DATA SHEET * see separate data sheet ** industrial quality of decor 446 *** also available in Adverso (AD) surface (see seperate data sheet) Homapal GmbH | Bahnhofstrale 30/32 | D-37412 Herzberg am Harz | T +49 (0) 5521-856-0 | F +49 (0) 5521-856-20 | www.homapal.com

Open the catalog to page 1

Open the catalog to page 2

Open the catalog to page 3

Open the catalog to page 4

HOMAPAL® METAL DECORS TECHNICAL DATA SHEET ALU BRUSHED | ELEMENTS 546 Alu Brushed Stainless Steeltone 794*** Alu Brushed Goldtone Special 456 Alu Brushed Medium Bronzetone 791*** Alu Brushed Natural Special 796*** Alu Brushed Steeltone Special ** industrial quality of decor 446 *** also available in Adverso (AD) surface (see seperate data sheet) GENERAL INFORMATION Homapal® Alu Brushed is a decorative metal laminate with a surface material consisting of a thin aluminium layer. This aluminium layer is protected by a thin epoxy coating. Note: The kraft paper core layers are impregnated with phenol-formaldehyde...

Open the catalog to page 5

HOMAPAL® METAL DECORS TECHNICAL DATA SHEET ALU BRUSHED | ELEMENTS 546 Alu Brushed Stainless Steeltone 794*** Alu Brushed Goldtone Special 456 Alu Brushed Medium Bronzetone As with standard HPL products, Homapal® metal laminate must also be stored in a closed storeroom protected against moisture and UV radiation. Storage should be in a standard climate, i.e. approx. 18-25°C and 50-60% relative humidity. The panel is covered with a protective foil upon completion of the final inspection. Our protective foil is only a transport protection. This does not absolve you from a timely incoming inspection...

Open the catalog to page 6

HOMAPAL® METAL DECORS TECHNICAL DATA SHEET ALU BRUSHED | ELEMENTS 546 Alu Brushed Stainless Steeltone 794*** Alu Brushed Goldtone Special 456 Alu Brushed Medium Bronzetone 791*** Alu Brushed Natural Special 796*** Alu Brushed Steeltone Special ** industrial quality of decor 446 *** also available in Adverso (AD) surface (see seperate data sheet) FIRE AND EXPLOSION PROTECTION DATA IGNITION TEMPERATURE FLASH POINT THERMAL DECOMPOSITION Possible above 250°C. Toxic gases (carbon monoxide, carbon dioxide) can be generated depending on the fire conditions (temperature, oxygen content, etc.). EXTINGUISHING...

Open the catalog to page 7

ALU BRUSHED ELEMENTS

ALU BRUSHED ELEMENTS

Catalog excerpts

All HOMAPAL GmbH catalogs and technical brochures

Archived catalogs