TITAN N
17Pages

ANGLE BRACKET FOR SHEAR AND TENSILE FORCES HIGH HOLES Ideal for CLT, it is easy to install thanks to the raised holes. Values also certified with partial fastening for presence of bedding mortar or root beam. 80 kN SHEAR Exceptional shear strengths. Up to 82,6 kN on concrete (with TCW washer). Up to 46,7 kN on timber. 70 kN TENSILE On concrete, TCN angle brackets with TCW washers provide excellent tensile strength. R1,k up to 69,8 kN characteristic values. CHARACTERISTICS FOCUS shear and tensile joints LBA, LBS, VIN-FIX PRO, EPO-FIX PLUS, SKR, AB1 MATERIAL Bright zinc plated carbon steel, three dimensional perforated plate. FIELDS OF USE Shear and tensile joints for timber-to-concrete and timber-to-timber applications • CLT, LVL • solid timber and glulam • framed structures (platform frame) • timber based panels 186 | TITAN N | PANELS AND BUILDING J

CONCEALED HOLD DOWN Ideal on timber-to-concrete both as a hold down at the ends of the walls and as shear angle bracket along the walls. It can be integrated into the floor panels. ALL DIRECTIONS Certified shear (F2,3), tensile (F1) and tilting (F4,5) strengths. Values certified also for partial fastenings and with interposed acoustic profiles. PANELS AND BUILDING JOINTS | TITAN N | 187

CODES AND DIMENSIONS TITAN N - TCN | CONCRETE-TO-TIMBER JOINTS CODE TITAN WASHER - TCW | CONCRETE-TO-TIMBER JOINTS CODE TITAN N - TTN | TIMBER-TO-TIMBER JOINTS CODE ACOUSTIC PROFILE | TIMBER-TO-TIMBER JOINTS CODE xylofon plate extra soft EXTERNAL LOADS TITAN N: carbon steel DX51D+Z275. TITAN WASHER: S235 bright zinc plated carbon steel. To be used in service classes 1 and 2 (EN 1995-1-1). XYLOFON PLATE: 35-shore polyurethane compound. ALADIN STRIPE: Compact EPDM. FIELD OF USE • Timber-to-concrete joints • Timber-to-timber joints • Timber-to-steel joints ADDITIONAL PRODUCTS - FASTENING type...

INSTALLATION ON CONCRETE To fix TITAN TCN angle bracket to the concrete foundation, 2 anchors must be used, according to one of the following installation configurations, according to the acting stress. IDEAL INSTALLATION ALTERNATIVE INSTALLATION INSTALLATION WITH WASHER 2 anchors positioned in the INTERNAL HOLES (IN) (identified by a mark on the product) 2 anchors placed in the EXTERNAL HOLES (OUT) (e.g. interaction between the anchor and the concrete support reinforcement) Reduced stress on the anchor (minimum ey and kt eccentricity) Maximum stress on the anchor (maximum ey and kt...

STATIC VALUES | SHEAR JOINT F2/3 | TIMBER-TO-CONCRETE TCN200 F2/3 TIMBER STRENGTH TIMBER configuration on timber(1) • full pattern • pattern 4 • pattern 3 • pattern 2 • pattern 1 holes fastening Ø5 type CONCRETE STRENGTH Strength values of some of the possible fastening solutions for anchors installed in the inner (IN) or outer (OUT) holes. anchor type VIN-FIX PRO EPO-FIX PLUS 5.8/8.8 Precut INA threaded rod, with nut and washer: see page 520 MGS threaded rod class 8.8 to be cut to size: see page 534 fastened plate thickness nominal anchoring depth effective anchor depth minimum hole depth...

STATIC VALUES | SHEAR JOINT F2/3 | TIMBER-TO-CONCRETE TCN240 F2/3 TIMBER STRENGTH TIMBER configuration on timber(1) • full pattern • pattern 4 • pattern 3 • pattern 2 • pattern 1 holes fastening Ø5 type CONCRETE STRENGTH Strength values of some of the possible fastening solutions for anchors installed in the inner (IN) or outer (OUT) holes. anchor type VIN-FIX PRO EPO-FIX PLUS 5.8/8.8 Precut INA threaded rod, with nut and washer: see page 520 MGS threaded rod class 8.8 to be cut to size: see page 534 fastened plate thickness nominal anchoring depth effective anchor depth minimum hole depth...

TCN200 - TCN240 | PARTIAL FASTENING PATTERNS FOR STRESS F2/3 In the presence of design requirements such as F2/3 stresses of different value or the presence of an intermediate HB layer (levelling mortar, sill or ground) between the wall and the supporting surface, partial fastening patterns can be adopted: FULL PATTERN Pattern 2 also applies in case of F4, F5 and F4/5 stresses. MAXIMUM HEIGHT OF THE INTERMEDIATE HB LAYER • full pattern The height of the H B intermediate layer (levelling mortar, sill or timber platform beam) is determined by taking into account the following regulatory...

STATIC VALUES | SHEAR JOINT F4 - F5 - F4/5 |TIMBER-TO-CONCRETE TCN200 - TCN240 TIMBER • pattern 2 • full nailing TCN240 holes fastening The group of 2 anchors must be verified for: VSd,y = 2 x kt⊥ x F4,d TIMBER • pattern 2 • full pattern TCN240 holes fastening The group of 2 anchors must be verified for: VSd,y = 2 x kt⊥ x F5,d; NSd,z = 2 x kt// x F5,d TIMBER • pattern 2 • full pattern TCN240 The group of 2 anchors must be verified for: VSd,y = 2 x kt⊥ x F4/5,d; NSd,z = 2 x kt// x F4/5,d The F4, F5, F4/5 values in the table are valid for the acting stress calculation eccentricity e=0 (timber...

STATIC VALUES | SHEAR JOINT F2/3 | TIMBER-TO-CONCRETE TCN200 + TCW200 TIMBER STRENGTH TIMBER CONCRETE STRENGTH Strength values of some of the possible fastening solutions on concrete for anchors installed in internal holes (IN) with WASHER. anchor type VIN-FIX PRO EPO-FIX PLUS 5.8/8.8 Precut INA threaded rod, with nut and washer: see page 520 MGS threaded rod class 8.8 to be cut to size: see page 534 Installation of the anchors in the two internal holes (IN). 194 | TITAN N | PANELS AND BUILDING JOINTS fastened plate thickness nominal anchoring depth effective anchor depth minimum hole depth...

STATIC VALUES | SHEAR JOINT F2/3 | TIMBER-TO-CONCRETE TCN240 + TCW240 TIMBER STRENGTH TIMBER CONCRETE STRENGTH Strength values of some of the possible fastening solutions on concrete for anchors installed in internal holes (IN) with WASHER. EPO-FIX PLUS 5.8/8.8 AB1 EPO-FIX PLUS 5.8 • seismic EPO-FIX PLUS 8.8 anchor type VIN-FIX PRO EPO-FIX PLUS 5.8/8.8 Precut INA threaded rod, with nut and washer: see page 520 MGS threaded rod class 8.8 to be cut to size: see page 534 fastened plate thickness nominal anchoring depth effective anchor depth minimum hole depth hole diameter in the concrete...