AIR GLUE
2Pages

{{requestButtons}}

Catalog excerpts

AIR GLUE - 1

• Contact adhesive for timber, metal, rubber, polymeric materials, cardboard, concrete and other materials • Improves the adhesion of acrylic tapes to materials such as concrete and fibrous insulation layers • It can be used both indoors and outdoors • Adjustable spray width CHEMICAL AND METAL ANCHORS PLATES AND ANGLE BRACKETS POST BASES FAST DRYING UNIVERSAL SPRAY GLUE SCREWS AND FASTENERS FOR TERRACES INSTRUCTIONS FOR USE It is always advisable to have the correct Personal Protective Equipment (PPE) and to consult the technical data sheet and safety data sheet before starting the supply. Thoroughly clean surfaces and ensure that any loose or crumbling parts, paint, rust or dust are removed. Shake the can well before dispensing and rotate the nozzle to increase or decrease the spray size. Spray evenly over the surface, repeat the process for highly absorbent surfaces. Protect the adhesive surface from dust and moisture during the drying process. The surface is ready for bonding when it is dry to the touch and the glue does not transfer. To use the glue as a contact adhesive distribute it on both surfaces. Do not use in areas without ventilation Flammable product Do not breathe vapours/aerosols Avoid contact with eyes and skin Keep out of reach of children Dispose of contents/container in accordance with local regulations Follow the information on the safety data sheet Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use ROOF ELEMENTS SEALANTS, TAPES AND PROFILES SEALANTS, TAPES AND PROFI

Open the catalog to page 1
AIR GLUE - 2

PLATES AND ANGLE BRACKETS mix of thermoplastic adhesive and solvent application temperature (spray can, support and environment) temperature resistance once dried transport temperature The product remains stable for 24 months if stored in the original packaging in a dry and covered place, in an upright position. ROOF ELEMENTS SEALANTS, TAPES AND PROFILES CHEMICAL AND METAL ANCHORS time required for drying 20 °C / 50 % RH SCREWS AND FASTENERS FOR TERRACES SEALANTS, TAPES AND PROFILES | AIR GLUE | 08-23 POST BASES

Open the catalog to page 2

All HOLZ TECHNIC catalogs and technical brochures

  1. TITAN F

    9 Pages

  2. TITAN N

    17 Pages

  3. UV-T

    9 Pages

  4. WHT PLATE T

    4 Pages

  5. XEPOX

    14 Pages

  6. WINDOW BAND

    2 Pages

  7. PROTECT

    2 Pages

  8. LEVEL BAND

    1 Pages

  9. BUTYL BAND

    1 Pages

  10. ALU BAND

    1 Pages

  11. LBB

    6 Pages

  12. WHT PLATE C

    8 Pages

  13. SILENT FOAM

    2 Pages

  14. GROUND BAND

    4 Pages

  15. FILLUM

    1 Pages

  16. COMPRIMO

    1 Pages