5907
2Pages

Catalog excerpts

155 Hardman Avenue South, South St. Paul, MN 55075 e-mail: customerservice@holtkoetter.com Please make sure that the following parts for your low-voltage pendant are enclosed: 1. Fixture including ceiling canopy, frame and height adjustment bar. This fixture utilizes an electronic, line-voltage (120 V input) to low-voltage (12 V output) transformer by LIGHTECH. If you are planning to use a dimmer with this fixture, we recommend using a Lutron ELV (electronic low voltage) style dimmer. Fixture No. S907/7 includes a 175-Watt transformer, allowing for a 20-Watt maximum per bulb. NOTE: The electronic transformer by LIGHTECH is equipped with an automatic reset switch. If the fixture is not working or has created a short, disconnect the power to the fixture and the transformer will reset itself. 2. Additional backplate and universal crossbar strap 4. Bulbs for 5907/7: 7 ea x 20 Watt Halostar by Osram, G4 base. Be sure to turn off the circuit breaker before installing this fixture. It is recommended that this fixture be installed and hung by a licensed electrician. Underwriter's Laboratories requires that these IMPORTANT SAFETY INSTRUCTIONS be listed: INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY WARNING: TO REDUCE THE RISK OF FIRE OR INJURY, PLEASE FOLLOW THESE SAFETY INSTRUCTIONS: 1. Turn off power and allow to cool before replacing lamps. 2. Lamp gets HOT quickly! Contact only switch/plug when turning on. 3. Keep lamp away from materials that may burn. 4. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp. 5. Do not operate luminaire with missing or damaged glass. CAUTION: The recommended replacement bulbs for this fixture are 20 Watt Halostar-G4 bulbs by Osram. Use of other brands of unknown quality may cause a risk of overheating. Low-voltage Halogen Pendants Care Instructions_ Use only a soft, dry cloth to clean the finished parts. If necessary, a slightly damp, soft cloth can be used to spot clean the finished parts. Use a soft, damp, lint-free cloth to clean the acrylic parts. Do not use common household cleaners on lamps or fixtures, as the lacquer on the outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp. Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH. Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter International, Inc. in South St. Paul, MN. Holtkötter® and Holtkötter Leuchten® are registered trademarks of Holtkötter International, Inc. All Rights Reserved.

Open the catalog to page 1

e-mail: customerservice@holtkoetter.com Low-voltage Halogen Pendant Mounting Instructions (Diagram 1) Parts used: A. Round 5" decorative plate with universal crossbar B. Long metal strap with screws C. Two brass tubular nuts 1. Disconnect power to the box before 2. Remove decorative knobs (D) and the brass tubular nuts (C) that are located under the decorative knobs (D). 3. Remove the long metal strap (B) located 4. Mount the round decorative plate (A) to the metal strap with screws provided on the universal crossbar strap, then mount the assembled piece to the outlet box. 5. Connect the...

Open the catalog to page 2

5907 2Pages

Catalog excerpts

All Holtkötter Leuchten catalogs and technical brochures

5907
2Pages