155 Hardman Avenue South, South St. Paul, MN 55075 e-mail: [email protected] Please make sure that the following parts for your wall sconce are enclosed: 2. Reflector Kit including the glass reflector 3. 35 Watt Halopin IRC bulbs by Osram (5583/3 - 3 ea.; 5584/4 - 4 ea.; 5585/5 - 5 ea.) 4. Plastic wrench (Montageschlüssel) 5. If a wall dimmer is required, it is recommended that a Lutron ELV (Electronic Low Voltage) dimmer be used. Care Instructions Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the outside of the brass may be damaged as a result. Enjoy your new Holtkötter IT IS FIRMLY RECOMMENDED THAT A LICENSED ELECTRICIAN INSTALL THIS General Installation Instructions 1. Disconnect power to outlet box before 2. Remove the cover plate from the front of the sconce (the sconce bracket itself is the universal crossbar strap). 3. Connect the wires from the sconce with the wires in the outlet box according to generally accepted electrical Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH. Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter International, Inc. in South St. Paul, MN. Holtkötter Bath: Ludwig Series Holtkötter® and Holtkötter Leuchten® are registered trademarks of Holtkötter International, Inc. All Rights Reserved.

e-mcril: [email protected] (Mounting screws are not provided.) to the fixture and secure with finished Bulb and Glass Shade Installation Instructions 1. Install the new bulb being careful not to touch the bulb envelope with your bare hands. Hold the bulb using the packaging material or tissue and push it straight into the socket. Remove protective material. Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH. Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter International, Inc. in South St. Paul, MN. 2. Prepare to install the glass by seating...