Catalogs >
HOLCIM >
protecta hir 300

protecta hir 300
2Pages

Catalog excerpts

Mold Defense Protecta H IR 300 Type X with Mold Defense Is designed for use In Interior areas where a higher resistance to abrasion, Indentation and Impact penetration Is required. Applicable areas Include: • Elevator and stair enclosures In high-rise buildings as required by code • Hotel lobbies • Mechanical/maintenance areas • Other high-traffic and public areas High Abuse Resistance: Protecta H IR 300 Type X with Mold Defense offers better Impact penetration resistance than regular abuse-resistant drywall products, thus reducing costs associated with maintenance Low Installation Cost: Compared to block construction, Protecta HIR 300 Type X with Mold Defense Is Installed easily and quickly. It cuts and snaps like standard drywall. Fire Resistance: Protecta HIR 300 Type X with Mold Defense Is formulated to perform In accordance with ASTM C 1396, Section 5 and C 36, Type X and Is UL labeled. (Type Mold Resistance: Protecta HIR 300 Type Xwlth Mold Defense provides enhanced protection against the growth of mold and High Impact-, Fire- and Mold-Resistant Drywall TYPE X WITH MOLD DEFENSE® Lafarge Protecta HIR 300 Type X with Mold Defense is a high impact-, fire- and mold-resistant drywall that incorporates the proven formulation of our industry-preferred, abuse- resistant board. It consists of a fiberglass-enhanced, non-combustible, high-density, synthetic gypsum core with reinforced strong facers which guard against surface abrasion, indentation, Protecta HIR 300 is further enhanced with an engineered reinforcement technology to provide a greater resistance to penetration for interior walls and ceilings, achieving Level 3 soft and hard body impact per ASTM C 1629. To ensure optimum Type X fire-resistant performance, follow recommended installation procedures. When used in a certified sound-rated assembly, Protecta HIR 300 will also contribute to required sound transmission classification (STC) values. Mold Defense* Mold Defense offers enhanced protection against the growth of mold and mildew compared to ordinary drywall products. Under controlled testing conditions, Mold Defense achieved an average panel score of 10 out of a possible 10 using ASTM D 3273. Lafarge Mold Defense products are compliant with the treated article exemption of FIFRA Note: Protecta HIR 300 Type X with Mold Defense is suitable for interior applications only and should not be used where temperatures exceed 125° F for extended periods or in areas of extreme humidity. Likewise, the board should be protected from exposure to adverse conditions during Protecta HIR 300 Type X with Mold Defense is not intended to be used as a ceramic tile wall backing in wet areas or floor Available Sizes Nominal thickness Nominal width Standard length Nominal weight

Open the catalog to page 1

Building Council's LEED Credit Qualification in several credit categories to assist in obtaining LEED certification. Visit www.lafargenorthamerica.com for more details on specific credit *Mold Defense provides extra resistance against the formation of mold, but no product may be considered "mold proof." The most effective way to avoid the formation of mold and mildew in drywall products Is to limit or avoid water exposure during storage, construction and after construction Is complete. Used In combination with appropriate design, handling, construction and installation practices, Mold...

Open the catalog to page 2