*myarchiexpo

Catalogs
Hoesch Bausysteme
TECHNICAL INFORMATION

TECHNICAL INFORMATION

Product catalog summary

Company and Product Overview

Hoeschbausysteme GmbH specializes in roof and wall building products, including sandwich panels, single skin, and structural decks. Their German-engineered products comply with European standards and hold certifications such as Deutsches Institut für Bautechnik (DIBt) approval and various international certifications.

Quality and Warranty

The company offers comprehensive warranties on coating systems, extending up to 30 years depending on coating type, anti-corrosion systems, and environmental conditions. Customers should consult local sales offices for precise warranty details.

Product Types and Profiles

Hoesch provides multiple sheet profiling options: flat (E), micro-profiled (M, 8 mm pitch), V-profiled (V, 16 mm pitch), Maxi-Micro (B, 30 mm pitch), and linear profiled (L). Profiles are selected based on product type and application needs.

Fire and Safety Standards

Products meet stringent fire safety classifications including non-combustible A2-s1,d0 (DIN EN 13501-1) and B-s1,d0 (EN 13501-1). Certifications such as FM Approval Class 4880 and LPS 1181 ensure compliance with high fire and building safety standards.

Sandwich Panels – General Information

The product range includes sandwich panels for walls and roofs with core materials like foamed mineral wool, polyurethane (PUR), and polyisocyanurate (PIR). Thicknesses range from 40 mm to 234 mm, with fixing module widths typically at 1000 mm but also available in 600, 900, and 1200 mm.

Thermal Performance

Thermal resistance (R-values) and thermal transition coefficients (U-values) are provided per EN 13165, EN 13162, EN 14509, and EN ISO 6946 standards. R-values range from approximately 1.6 to over 10 m²K/W depending on panel thickness and core material, indicating high insulation efficiency. U-values range from about 0.10 to 0.75 W/(m²K), with lower values representing better insulation.

Wall and Roof Products

Wall panels include Thermowand, Thermowand TL, isowand integral®, isowand design, isowelle®, isowand vario®, and isorock® variants. Roof panels include Thermodach, isodach integral®, isorock integral® D, and Thermorock Dach. Each product is defined by specific thickness ranges, core materials, fixing modules, and thermal/acoustic properties. Some panels are produced in Germany (DE) and others in Hungary (HU), with certain variants available on request.

Acoustic Performance

Sound Reduction Index (R_W) values range from 25 dB to 34 dB depending on product and thickness. For example, Thermowand panels provide around 25 dB sound reduction, while isorock akustik® panels achieve up to 34 dB, enhancing sound insulation.

Panel Dimensions and Fixing

Panel widths vary from 600 mm to 1200 mm.
Thickness ranges from 60 mm to 234 mm depending on product.
Maximum panel lengths typically range from 1000 mm to 1176 mm.
Fixing options include visible and concealed methods.

Sheet Profiling and Thickness

Profiles include micro-profiled, V-profiled, Maxi-Micro, linear, flat, trapezoidal, and corrugated. Sheet thicknesses range from approximately 0.3 mm to 1.0 mm depending on profile and product.

Production Locations

"DE" denotes production in Kreuztal, Germany.
"HU" denotes production in Felsölajos, Hungary.

Advanced Technology – IPN-QuadCore

The IPN-QuadCore technology offers superior thermal performance, a 40-year thermal and structural guarantee, enhanced fire protection, and improved environmental credentials. It supports sustainable, net-zero energy building designs.

Guarantees and Compliance

Hoesch provides a 30-year coating guarantee and an all-inclusive building envelope guarantee. Products comply with European guidelines and quality labels, ensuring reliability and high performance.

Profiles and Weights

Extensive tables detail aluminium and steel profiles categorized by type (Typ N, Typ S), installation orientation, and material thickness (0.63 mm to 1.50 mm). Cover widths range from 200 mm to over 1100 mm, with maximum lengths between 6 m and 24 m. Acoustic variants include perforation percentages (e.g., 16% perforation for Roof System 2000 acoustic profiles).

Roof System 2000

Approved by building inspectorate (Z-14.1-137), this system features trapezoidal profiles with 750 mm cover width and 205 mm profile height. Material thickness options range from 0.75 mm to 1.50 mm, including acoustic perforated variants.

Flashings and Accessories

Hoesch offers standard and customized flashings matching panel geometry, thickness, and coatings. Flashings can be ordered by reference or custom-designed with detailed drawings. Advantages include broad color ranges, powder coating, individual painting, high production capacity, short lead times, and coordinated delivery. Flashings can be produced up to 8 m long and 3 mm thick, with small order quantities accepted.

Critical Information and Best Practices

Select panel thickness and profiling based on structural, thermal, and acoustic requirements.
Verify fire classification compliance with local building codes.
Consider fixing and joint types as they affect thermal performance.
Choose sheet profiling to meet architectural design and load demands.
Consult manufacturer early for availability of specific thicknesses and configurations.
Specify A and B sides correctly when ordering coated profiles.
Ensure flashings are compatible with panel systems and architectural design.

Summary

This document is a comprehensive technical reference for Hoesch insulated panels used in roofing and wall applications. It provides detailed data on thermal insulation, fire safety, acoustic performance, dimensions, profiles, and installation options. The information supports architects, engineers, and contractors in selecting and specifying panels to optimize building envelope performance, durability, and compliance with European and international standards.

Catalog excerpts

HOESCHBUILDING SYSTEMSHOESCHBAUSYSTEME GMBH HammerstraBe 11 | 57223 Kreuztal | Germany Phone: +49 (0) 27 32 599 1 599 | Fax: +49 (0) 27 32 599 1 271 | [email protected] | www.hoesch-bau.com The information provided in this leaflet is subject to technical modifications. Details of features can be guarenteed only as far as these are explicitly confirmed in writing on a case by case basis. GB ■ Technical Information GB ■ Info 1.1.1 ■ 05/2016 ■ BC

Open the catalog to page 1

GERMAN ENGINEERED TECHNICALINFORMATION FULL PRODUCTION RANGE SANDWICH PANELS, SINGLE SKIN AND STRUCTURAL DECKS ROOFPRODUCTS

Open the catalog to page 2

GENERAL INFORMATION ABOUT SANDWICH PANELS Building products made by Hoesch Building Systems comply with the applicable European guidelines. All our products comply with the requirements of the quality seals shown above and have been officially approved by Deutsches Institut für Bautechnik of Berlin. For other countries, additional approvals have been granted. To ensure the long term serviceability of our products, we provide a comprehensive warranty to cover the durability of our coating systems. Depending on the colour coating and anti-corrosion system chosen together with the prevailing environmental...

Open the catalog to page 3

SANDWICH PANELS Joint Wall products Preferred Fixing (Section Drawing: Note that tolerances can vary subject to the panel thickness) visible Module width Core Material Hoesch® Thermowand mineral wool Element thickness Hoesch isowand integral®  Hoesch® isowand design Hoesch isowand vario® ems-isolier® Panel EM snap Hoesch isorock® Hoesch isorock vario® Hoesch isorock akustik®  S1 Roof products Preferred Fixing visible Hoesch® Thermodach Core Material foamed mineral wool Element thickness (are available on request) Hoesch isodach integral®  Hoesch isorock integral® D Hoesch® Thermorock Dach...

Open the catalog to page 4

Wall products Hoesch® Thermowand Hoesch isowand integral® Valued Sound Reduction Index (RW R'w) * are available on request 1) Only in sheet thickness for E- and L- profiled "DE" = production in Kreuztal, Germany "HU" = Production in Felsolajos, Hungary GB ■ Technical Information 1.1.1 ■ 05/2016

Open the catalog to page 7

Wall products Reaction to fire according to EN 13501-1 Classification Panel thickness Hoesch® Thermowand Hoesch isowand integral® Hoesch® isowand design Hoesch isowelle® Hoesch isowand vario® ems-isolier® Panel EM snap Hoesch isorock® Hoesch isorock vario® Hoesch isorock akustik® Wall products Reaction to fire according to EN 13501-1 Classification Panel thickness Hoesch® Thermodach Hoesch isodach integral® Hoesch isorock integral® D Hoesch ® Thermorock Dach "DE" = production in Kreuztal, Germany "HU" = Production in Felsolajos, Hungary More detailed fire classifications may be found at...

Open the catalog to page 8

External skin Cover sheet Micro-profiled (M) V-profiled (V) ww Cover sheet Liniert (L) Eben (E) 21 only in production in Felsolajos 31 only in production in Kreuzta

Open the catalog to page 9

Internal skin Linear profiled (H) Linear profiled (L) Linear profiled (H) Flat (E) profiling Trapezprofiliert (T) Wellprofiliert (W) Liniert (H) Liniert (L) Innenschale Liniert (H) Eben (E)

Open the catalog to page 10

HOESCH IPN QUADCORE TECHNOLOGIE FUTURE-PROOFED GREEN BUILDINGS WITH ENHANCED LIFETIME PERFORMANCE IPN-QuadCore: TOMORROW’S BUILDINGS ARE NOW POSSIBLE TODAY Introducing IPN-QuadCore, a quantum leap in insulated panel technology that delivers industry-leading thermal performance, a 40-year thermal and structural guarantee, superior fire protection and enhanced environmental credentials. ASK OUR EXPERTS We can help with lower upfront costs through more informed specification and also an improved return on investment throughout your build and beyond. We will show you how IPN-QuadCore delivers lower...

Open the catalog to page 11

GENERAL INFORMATION FOR SINGLE SKIN ROOF AND WALL PRODUCTS Building products made by Hoesch Building Systems comply with the applicable European guidelines. Hoesch Building Systems GmbH provides wall and façade systems in any dimension and design. Many wall systems can be matched, allowing for architecturally outstanding solutions. Wall panels can be used in single or double sheet design to meet the high requirements of the quality labels shown above. Our all-inclusive guarantee for the building envelope safeguards your investment into the future, thanks to our 30 year guarantee for our coatings....

Open the catalog to page 12

PROFILE WEIGHTS - UNPERFORATED STEEL Cover Max. width length * Special overall width on length m kg/m Special Material - on request ALUMINIUM Cover width Max. Recom- length mended length mm m m weight weight Installation without tension of the supstructure and facade according to DIN 18516-1 GB ■ Technical Information 1.1.1 ■ 05/2016 Special overall width on request

Open the catalog to page 13

Hoesch® Trapezoidal Profile Roof Product Production DE-Kreuztal Length kg/m2 for material thickness (tN) A and B sides (upper/lower side) to be specified in the case of various coatings. Hoesch® Trapezoidal Profile Acoustic Product Production DE-Kreuztal Length kg/m2 for material thickness (tN) percentage A and B sides (upper/lower side) to be specified in the case of various coatings.

Open the catalog to page 14

Hoesch® Trapezoidal Profile Roof Production HU-Felsolajos /" M»W Am. Cover width Max. Length mm m Weight kg/m2 for material thickness (tN) A and B sides (upper/lower side) to be specified in the case of various coatings. *Old notation. Hoesch® Trapezoidal Profile acoustic Production HU-Felsolajos Cover width Max. Length mm m Weight Perforation kg/m2 for material thickness (tN) percentage A and B sides (upper/lower side) to be specified in the case of various coatings. *Old notation. Hoesch® Trapezoidal Profile Wall / Roof Production DE-Kreuztal Product Cover width Max. Length mm...

Open the catalog to page 15

Hoesch® Trapezoidal Profile Wall Production HU-Felsolajos Product Cover width Weight kg/m2 for material thickness (1N) 0,63 0,75 0,88 1,00 1,25 A and B sides (upper/lower side) to be specified in the case of various coatings. Hoesch® Trapezoidal Profile acoustic Production DE-Kreuztal Cover width Max. Weight Perforation Length kg/m2 for material thickness (tN) percentage A and B sides (upper/lower side) to be specified in the case of various coatings. Hoesch® Trapezoidal Profile acoustic Product — A and B sides (upper/lower side) to be specified in the case of...

Open the catalog to page 16