ISODACH RD
4Pages

Application Hoesch® isodach RD is a trapezoidal profile panel system with visible fixing. It can be used for all buildings with a roof pitch of: ■ at least 4° (7%) without the formation of transverse joints ■ at least 6° (10%) with the formation of transverse joints Dimensions & dead load PRODUCT DATA SHFFT 333.3 mm Internal steel sheet profilings Tolerances 2) Parameters Element length (l) L < 3 m L > 3 m Element width Element thickness (D) D < 100 mm D > 100 mm Delivery lengths The standard delivery length is between 3.00 - 13.50 m (without additional costs). The maximum production length is 22.50 m. Other lengths are available upon request. Perpendicularity of the cut edge s Lengthways and transverse camber Technical regulations We have been awarded the EU specific technical approvals (Z-10.49-813) and certifications for insulated sandwich elements (heat protection, bearing capacity, fire protection, sound proofing). For further information, please contact our specialist field service advisers. Length Width for plane profiles: h < 10 mm Width for other profile depths: h > 10 mm The individual specifications in this datasheet are guaranteed properties only if they are expressly confirmed as such in writing in each specific case. Subject to technical changes. 2) Other tolerances can be found in DIN EN 14509

PRODUCT DATA SHEET nuts^n ■■■■ The individual specifications in this datasheet are guaranteed properties only if they are expressly confirmed as such in writing in each specific case. Subject to technical changes. Element back-cut*/installation direction For the transverse seams from panel to panel, or to light module, a back-cut (overlapping) should be provided. For this, a factory-performed back-cut can be provided. The standard back-cut with foam-free area amounts to 20 mm, and back-cuts up to 300 mm are possible. For manufacturing, it is necessary to specify the installation...

HOESCH PRODUCT DATA SHEET IPN 1 1D = 0,022 [W /mK] U [W /m2K] Technical specifications Insulation perforamance as per EN 14509 incl. joint IPN 1D = 0,024 [W /mK] U [W /m2K] 0,78 0,52 U - thermal transition coefficient W/m2K 1D - thermal conductivity (after ageing) W/mK Environmental sustainability Hoesch sandwich elements with an PIR insulation core react neutrally chemically and provide no breeding grounds whatsoever for mould and rot. Fire protection In terms of fire behaviour and resistance, Hoesch® isodach RD has been tested according to national technical regulations and standards....

Condensation-repellent sealing tape (factory-set) internal steel sheet Total width Available element thicknesses Installation direction: Type R = installation from right to left external steel sheet PVC sealing tape (factory-set) The individual specifications in this datasheet are guaranteed properties only if they are expressly confirmed as such in writing in each specific case. Subject to technical changes. HOESCH® ISODACH RD ELEMENT DIMENSION