*myarchiexpo

5474043FM

Product catalog summary

Product Overview: The document details the specifications for the external parts of the timed flow shower model CONBUS-KNX, COMFORT, which includes a thermostat and is designed for use in Germany. The product features a round cover plate and piezo switches, made from brushed stainless steel.

Specifications:

Thermostatic Mixer: COMFORT with thermostat.
Nominal Connection Width: DN15, 1/2 inch.
Material: Brushed stainless steel.
Operating Voltage: 26-28V/DC (KNX) with auxiliary voltage of 24V/DC.
Power Consumption: 1.2 W.
Operating Pressure: 1.5 - 5.0 bar.
Flow Rate: 0.15 l/s.
Maximum Water Temperature: 70°C, with a brief tolerance up to 80°C for thermal disinfection.
Flow Rate TD: 0.05 l/s with flow rate controller.
Protective System: IP 68 for electronic components.

Installation Requirements: The connection line must be laid and connected on-site according to topology, using EIB J-Y(St)Y 2 x 2 x 0.8 mm, green. Wiring must be performed by a qualified electrician in accordance with DIN VDE 105-100 or local regulations.

Additional Information: The product is currently available only in Germany. Typing and setting mistakes, as well as technical and dimensional changes, are reserved.

Catalog excerpts

Article No. 5474043FM External parts for timed flow shower CONBUS-KNX, COMFORT - with thermostat, DN15, round cover plate, piezo switches, brushed stainless-steel Currently only available in Germany mixture: COMFORT - with thermostat, thermostatic mixer nominal connection width: DN15, 1/2 inch cover plate: round cover plate pushbutton: piezo switches Material: brushed stainless-steel Operating voltage: 26-28V/DC (KNX) + auxiliary voltage 24V/DC Power consumption: 1,2 W Operating pressure: 1,5 - 5,0 bar Flow rate: 0,15 l/s Max. water temperature.: 70°C (80°C [176° F] briefly for thermal disinfection) Flow rate TD: 0,05 l/s (flow rate controller) Protective system: IP 68 (electronic components) Connection line mandatory (EIB J-Y(St)Y 2 x 2 x 0,8 mm, green) lay and connect on-site according to topology. Wiring must be carried out by a qualified electrician according to DIN VDE 105-100 [or local regulations]. CONTI Sanitärarmaturen GmbH, Hauptstr. 98, D-35435 Wettenberg | Fon: +49 641 98221-0 | Fax: +49 641 98221-50 | [email protected] | www.conti.plus Satzfehler und Irrtümer sowie technische und maßliche Änderungen vorbehalten | Typing- and setting mistakes and other errors cannot be excluded and are therefore reserved. Powered by TCPDF (www.tcpdf.

Open the catalog to page 1

All HighTech Design Products AG catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list