MO-18 MINIONDA

Product catalog summary

Specifications:
The MO-18 Minionda is a corrugated sheet profile with a height of 18 mm, available in thicknesses up to 1.2 mm. It is offered in both galvanized and pre-painted finishes, with a wide range of colors available according to the HIANSA color chart. The useful width options are 836 mm and 1064 mm, and lengths range from 1600 mm to 14000 mm. Custom sizes can be provided upon request.

Geometric Characteristics:
The profile is made from steel and adheres to various standards including EN 508-1, UNE 10143, UNE 10346, and UNE 14782. The profile's weight, inertia, and resistance module vary with thickness, with specific values provided for each thickness from 0.5 mm to 1.2 mm.

Applications:
The MO-18 Minionda is suitable for various applications including sandwich roofs, interior profiles, deck roofs, simple facades, and lost formwork. It is also applicable for both interior and exterior profiles.

Standards and Norms:
The product complies with several standards such as EN 508-1 for self-supporting steel sheet products, EN 10143 for dimensional tolerances, EN 10169 for pre-painted steel products, and EN 10346 for hot-dip coated steel products.

Resistance Tables:
Admissible service loads are provided in kg/m², based on a calculation methodology in accordance with the NBE EA-95 standard. The tables indicate the maximum permissible loads depending on the distance between purlins, with specific values for each thickness and span.

Recommendations:
It is advised not to use the MO-18 profile for purlin separations that exceed the limits indicated in the load tables. The calculations are based on a stress limit of 1,400 Kp/cm².

Catalog excerpts

REV. 02 - Julio 2017 PROPIEDADES MATERIA PRIMA: Acero ACABADO Preiacado/Gaivanizado DESCRIPCION Y APLICACION PerfiL en chapa ondulada con una silueta de 18 mm de alto, disponibLe en diversos espesores que pueden ir hasta 1.2 mm. Disponible tanto en galvanizado como prelacado en una amplia gama de colores segun carta HIANSA. Se puede servir provista de perforaciones para las soluciones de montaje que asi lo requieran, con 3 mm de diametro, 5 mm entre ejes y 60° tresbolillo. El ancho util puede ser de 836 mm y 1.064 mm, mientras que la longitud puede estar entre 1.600 mm y 14.000 mm. Bajo consulta puede suministrarse en otros espesores, anchos y longitudes. Espesor chapa Recubrimiento preLacado Ancho util Solape de 2 ondas 760/880 mm. 950/1.100 mm. Util ^ Reaccion aL fuego HIANSA S.A. PoLigono Ind. Dehesa de Las Ciguenas . Parc A-1 14420 ViLLafranca de Cordoba TeLf 957198900 FAX 957198910 comerciaLrahiansa.com - www.hiansa.com

Open the catalog to page 1

MO-18 MINIONDATABLAS DE RESISTENCIA CARGAS ADMISIBLES (kp/m2) SEGUN LA DISTANCIA ENTRE CORREAS (m) 1 vano No se aconseja el uso del perfil MO-18 para separaciones de correas que quedan a la derecha del trazo grueso de la tabla de cargas admisibles. Sobrecargas de servicio admisibles, uniformemente distribuidas en kg/m2. Las tablas se han obtenido en funcion de una metodologia de calculo establecida de acuerdo a lo indicado en la norma NBE EA-95. Estos resultados cumplen los Estados Limite Ultimos de tensiones normales y tangenciales prescritos en dicha normativa y con una limitacion del Estado...

Open the catalog to page 2

All HIANSA PANEL S.A catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list