PRODUCT DATA SHEET – HEXDALLE® YOSTRA BOLLARDS Made of recycled black rubber aggregate which has been sorted and graded, bound by polyurethane elastomer resin; the assembly is then compressed under several tons of pressure in a single operation. Other processed chemical elements are used in the composition of our bollards to give them their solidity and elasticity. The YOSTRA bollards have been designed to be recycled. They can be returned to us after agreement and a reduction will be applied in the event of an exchange. Red – green – black – grey – black with speckled EPDM color REFERENCE YOSTRA C YOSTRA R YOSTRA P YOSTRA BOULE YOSTRA bollards have been designed to be harmonious in shape so as to fit into the environment. Microprism reflective strip – Height 50mm. Colour: Orange. Standard: ECE 104. YOSTRA BOULE does not have any reflective strip. Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: [email protected] Page 1 out of 4

YOSTRA bollards withstand different climates, dirt, mould and animal excrement. They do not rust and can be washed or cleaned with our Bactericidal, Fungicidal cleaning product: CLEANDALLE FC. You can regenerate the YOSTRA bollards using our PA63 acrylic coating. It is very important to keep the same colour as the original one (i.e.: a green bollard must remain green). The bollards can be fitted in two ways I – ONTO CONCRETE GROUND – Using a fixing plate a) Back-drill with the fixing plate 4 holes into the concrete ground, ø 10 - L 110 mm, b) Fit the FBN 10 pins (not included); Tighten nuts +...

PU59 Polyurethane glue Concrete foundation 300x300x310mm Dosed in cement at 350 kg/M3 YOSTRA BOLLARD ON FIXING ROD TO BE SEALED DIRECTLY THE DIFFERENT FIXING SYSTEMS FOR YOSTRA BOLLARDS Hole for a padlock. (not provided) REMOVABLE BOLLARD FIXING PLATE TO BE FIXED TO CONCRETE SLAB (15 cm thick) OR FOUNDATION (300 x 300 x 310 mm) Height 288mm for P, C and R Yostra bollards 117mm Height 208mm for Yostra BOULE NON-REMOVABLE BOLLARD FIXING PLATE TO BE FIXED TO CONCRETE SLAB OR FOUNDATION and R Yostra bollards Height 500 mm for Yostra BOULE FIXING ROD TO BE SEALED IN CONCRETE FOUNDATION FOR P, C, R...

Due to its heavy rubber design, the YOSTRA bollard avoids damaging cars. Preventive protection for supermarket car-parks, camp sites, hotels, schools, etc. The bollards are ideal for use in any place where parking is to be prevented but without damaging cars. This product is sold per unit PALLETS: disposable, 1,000 x 1,200mm PACKING: We take great care with packing to avoid any problem occurring during transport. In order to protect your rights and interests, we advise you to check the condition of the goods upon taking delivery. The products are packed using a white stretch film and France Construction-guaranteed...