1. Catalogs
  2. HEXDALLE
  3. HEXDALLE® XE D.J.P. TILES

HEXDALLE® XE D.J.P. TILES

HEXDALLE® XE D.J.P. TILES

Product catalog summary
Product Data Sheet – HEXDALLE® XE D.J.P. Tiles
1) Characteristics
The HEXDALLE® XE D.J.P. tiles are made from recycled black rubber aggregate bound by polyurethane elastomer resin. They are compressed under high pressure, resulting in normal expansion and contraction with temperature changes. Additional chemical elements enhance their solidity and elasticity.
I. Description
  • Dimensions: 500 x 500 mm
  • Thickness: 25 mm - 45 mm
  • Colors: Red, Green, Black
  • Features: Microporous for improved drainage, raised pattern for fluid drainage, potential color loss over time without affecting tile characteristics.
II. Use
These tiles are suitable for horse stalls, washrooms, stables, vans, veterinary clinics, paddocks, blacksmith’s rooms, and as wall shock-absorbing protection. They offer excellent heat insulation, comfort, and non-slip properties.
III. Maintenance
Daily cleaning is recommended, either by washing (maximum 3 Bars) or sweeping with a soft brush. For deep cleaning, use the CLEANDALLE FC bactericidal fungicidal product. Solvents should not be used.
IV. Application
Tiles should be laid on a hard, stable, sloping base (at least 5%). They must be aligned closely without joints. Cutting can be done with a Stanley knife or jig saw. Tiles can be glued using PU 93 glue applied with a fine-toothed scraper. Before installation, unpack tiles on a flat surface to allow them to regain their characteristics. Refer to the HEXDALLE® XE laying instruction sheet for detailed guidance.
Packaging
Packaging is customizable according to needs.
See more

Catalog excerpts

HEXDALLE® XE D.J.P. TILES-1

PRODUCT DATA SHEET – HEXDALLE® XE D.J.P. TILES 1) CHARACTERISTICS The tiles are made of recycled black rubber aggregate which has been sorted and graded, bound by polyurethane elastomer resin; the assembly is then compressed under several tons of pressure in a single operation. As a result of the composition, expansion in heat and shrinking in the cold are quite normal. Other processed chemical elements are used in the composition of our tiles to give them their solidity and elasticity. I. DESCRIPTION Dimension: 500 x 500 mm Thickness: 25 mm - 45 mm Colours: red – green – black The D.J.P. tiles are microporous to increase the draining of water and urine. A raised pattern on the underside allows fluids to drain away. Colour loss can occur on the surface with time without altering the characteristics of the tile. II. USE Covering for Horse stalls, Wash rooms, Stables, Vans, Veterinary clinics (sleeping room), Paddocks, Blacksmith’s rooms, to replace the straw bedding. Wall shock-absorbing protection, thickness: 10mm or 25mm. ® HEXDALLE XE D.J.P. tiles also provide excellent heat insulation, and they are comfortable and non-slip. We recommend cleaning HEXDALLE XE DJP tiles on a daily basis. The ® HEXDALLE XE DJP tiles can be simply washed (maximum 3 Bars) or swept with a soft brush. For a deep clean, use our bactericidal fungicidal cleaning product CLEANDALLE FC. Never use a solvent to clean the tiles. HEXDALLE XE D.J.P. tiles must be laid on a hard, stable, sloping base (at least 5 %). The tiles should be lined up without leaving any joints (laid very closely to one another). Any cutting can be done with a Stanley knife or a jig saw. ® The HEXDALLE XE D.J.P. tiles can be glued with our PU 93 glue. Apply the glue with a fine-toothed scraper onto the concrete, bitumen-coated material or wood base, and lay the tiles. Before laying, unpack the tiles onto a flat surface so that they recover their characteristics. ® Refer to the HEXDALLE XE laying instruction sheet. Packaging: according to your needs Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in August 2011 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: [email protected] Page 1 out of 1

 Open the catalog to page 1

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.