1. Catalogs
  2. HEXDALLE
  3. HEXDALLE® XE BEVELLED EDGING

HEXDALLE® XE BEVELLED EDGING

HEXDALLE® XE BEVELLED EDGING

HEXDALLE® XE BEVELLED EDGING

Product catalog summary
Product Data Sheet – HEXDALLE® XE Bevelled Edging
Characteristics: Made from recycled black rubber aggregate, bound by volume-dyed polyurethane elastomer resin.
Colours: Available in Brick Red, Green, Black, and Grey.
Appearance: Granular texture.
Dimensions: Thickness ranges from 20mm to 80mm, with a width of 250mm and length of 500mm.
Use: Designed to finish the edge of play areas to prevent steps.
Laying: Must be laid on a stable, even surface such as concrete or bitumen. Use PU 93 or PU32 polyurethane glue for adhesion.
Packaging: Sold individually; two pieces cover one linear metre.
Maintenance: Can be washed or swept with a soft brush. Use Cleandalle FC for cleaning, avoiding solvents. Allow 72 hours after installation before first cleaning.
Product Data Sheet – HEXDALLE® XE Interior or Exterior Corner Pieces
Characteristics: Similar composition to bevelled edging, using recycled rubber and polyurethane resin.
Colours: Available in Brick Red, Green, Black, and Grey.
Appearance: Granular texture.
Dimensions: Thickness ranges from 20mm to 80mm, with a width and length of 250mm.
Use: Complements bevelled edging to finish play area edges.
Laying: Requires a stable, even surface for installation. Use PU 93 or PU32 polyurethane glue.
Packaging: Sold individually.
Maintenance: Similar to bevelled edging, can be washed or swept. Use Cleandalle FC for cleaning, avoiding solvents. Allow 72 hours after installation before first cleaning.
See more

Catalog excerpts

HEXDALLE® XE BEVELLED EDGING-1

PRODUCT DATA SHEET – HEXDALLE® XE BEVELLED EDGING I. CHARACTERISTICS Made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. II. COLOURS Brick Red – Green – Black – Grey V. USE The bevelled edging is used to finish off the edge of the play area in order to avoid having a step. VI. LAYING The bevelled edging is laid on a stable, even surface (concrete, bitumen-coated material) that is clean, ® flat and dry. Refer to the HEXDALLE tile laying instruction sheets. The bevelled edging is stuck underneath using the PU 93 or PU32 polyurethane glue. VII. PACKAGING Sold individually. Two bevelled edging pieces = 1 linear metre laid side by side. The HEXDALLE XE bevelled edging can be simply washed (maximum 3 Bars) or swept with a soft brush. You can also use our bactericidal cleaning product: Cleandalle FC. Allow 72 hours after sticking before cleaning for the first time. Never use a solvent to clean the tiles. Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: [email protected] Page 1 out of 3

 Open the catalog to page 1
HEXDALLE® XE BEVELLED EDGING-2

PRODUCT DATA SHEET – HEXDALLE® XE INTERIOR OR EXTERIOR CORNER PIECES I. CHARACTERISTICS Made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. II. COLOURS Brick Red – Green – Black – Grey V. USE The corner pieces are used to finish off the edge of the play area with the bevelled edging. VI. LAYING The corner pieces are laid on a stable, even surface (concrete, bitumen-coated material) that is clean, ® flat and dry. Refer to the HEXDALLE tile laying instruction sheets. The corner piece is stuck underneath using the PU 93 or...

 Open the catalog to page 2
HEXDALLE® XE BEVELLED EDGING-3

Exterior corner Bevelled edging Interior corner INTERIOR CORNER EXTERIOR CORNER Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: [email protected] Page 3 out of 3

 Open the catalog to page 3

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.