PRODUCT DATA SHEET – HEXDALLE® P1/P2 REVERSIBLE EDGING CHARACTERISTICS Made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin – Moulded and compressed under several tons of pressure in a single operation. Other processed chemical elements are used in the composition of the edging pieces to give them their solidity and elasticity. I. COLOURS Red – Green – Black – Black flecked with colour. ® The colours available are a perfect match for the entire range of HEXDALLE tiles. II. DIMENSIONS Thickness: 60mm. Height: 200mm – Length: 1,000mm Tolerance: +/- 0.5 % at 20 ° III. USE Finishing edging pieces to surround play areas, long jump facilities, running tracks, Beach Volley courts, race tracks, trees, sandpits, etc. IV. APPEARANCE Granular due to the ¼-mm rubber-based composition. The HEXDALLE edging pieces can be used to replace concrete kerbstones where it is preferable not to have any hard points to avoid injury. VI. MAINTENANCE Use our Bactericidal cleaning product: Cleandalle FC Green is more sensitive to UV rays than red. A special PU 63 non-slip paint can be applied by airless spraying by a specialist to renovate the appearance of the pieces. VII. PACKAGING Product sold individually Maximum amount per pallet: 110 Units

VIII. LAYING 1st possibility Steel twist Concrete dosed at 300 kg/m3 Concrete dosed at 300 kg/m3 Reversible edging Apply a trickle of glue Sand Soil Steel twist Tip: Drill the edging piece and use a steel twist to avoid the Hexdalle Reversible edging pieces being pulled up (not provided) Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was modified in November 2006 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative...