PRODUCT DATA SHEET –HEXDALLE® MUSHROOM I. CHARACTERISTICS HEXDALLE® MUSHROOM is made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. Other processed chemical elements are used in the composition of our HEXDALLE MUSHROOM for solidity and elasticity. II. COLOURS Red – Green – Black – Grey with beige flecked with red EPDM dots TOTAL HEIGHT IV. USE HEXDALLE® MUSHROOM is a recreational element, entirely made of rubber that can be used in various ways: As a seat, a balance game, to play leapfrog or count the dots. Very decorative, HEXDALLE® MUSHROOM will enlighten your playgrounds and public gardens. HEXDALLE MUSHROOM complies with the NF EN 1176-1 (Oct 2008) standard. V. ADVANTAGES HEXDALLE® MUSHROOM is designed with smooth lines and rounded angles. Weather proof Each mushroom is delivered ready to use. Indeed, both cap and stem have been glued at the factory. VI. SURFACE ASPECT The item has a granular surface aspect due to its composition. VII. SAFETY INSTRUCTIONS It is accepted that children should be supervised at all times. The equipment must not be installed on a too sloping ground. Type of ground: it must be flat or with a 1% slope Clearance: there should be no obstacle less than 2 meters above the equipment (tree branches, etc.) VIII. CLEANING/MAINTENANCE Use our Cleandalle FC bactericidal degreasing cleaning product. Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was modified in October 2011 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: [email protected]

The green colour is more sensitive to U.V. than the red colour. HEXDALLE® MUSHROOM can be renewed thanks to our special PU63 or PA63 non-slip paint. The paint should be applied by a professional, using an airless spray gun. Each month: • check that the playground is clean • check the mushroom surface condition • check the mushroom stability If severe damage is noticed which could threaten children’s safety, action must be taken immediately. If the problem cannot be solved, the equipment should be immobilised or removed to prevent its use. For playgrounds which are used intensively or are subject...

Option 1: Hexdalle® Mushroom – 1 unit Play impact surface: shock-absorbing ground – 12.25 sqm (3.50 m x 3.50 m) 3.50 m Play safety area: Obstacle free – 2m minimum around the equipment Height : 27, 42 ou 57 cm Option 2: Kit Hexdalle® Mushrooms (2 units minimum) Play impact surface: shock-absorbing ground – Depending on mushroom location. You need to keep a 930 mm separation from axis to axis between each mushroom. You can put the mushrooms one after the other, in triangle, etc. and make sure to keep 1.50 m around the game combination. Example 1 Play safety area: Obstacle free – 2m minimum around...

XII. 2 TYPES OF INSTALLATION Ø 80 mm steel tube welded on a Ø 80 mm steel tube to be fixed in plate concrete a b a Fixing plate height (a) outside the ground: mushroom 27 cm : 108 mm mushroom 42 cm : 208 mm mushroom 57 cm : 288 mm Fixing rod height (b): mushroom 27 cm : 400 mm mushroom 42 cm : 500 mm - mushroom 57 cm : 580 mm Fixing plate to be fixed on a concrete slab or pad Fixing rod to be fixed in concrete pad ON CONCRETE GROUND OR LOOSE SOIL a) On concrete ground – Use our fixing plate 1 – Back-drill four ø 10 mm holes into the concrete ground, using the fixing plate as template. 2 – Fit...