Herschel SELECT XLS Mirror The Herschel Select XLS Mirror forms part of our high performance frameless Select XLS range which incorporates our SMART-R receiver. Enabling simple installation and smart control through your choice of Select XLS thermostat (sold separately), you choose whether to control your heating directly from a thermostat, the convenience of an optional App, or even voice control when used with Alexa or Google Assistant. Select XLS Mirror can be placed in humid areas such as bathrooms without any condensation forming on the glass when on, whilst also chasing away the causes of moisture that convection-based heaters actually encourage (due to hot air moving over a cold surface). Select XLS heats up objects in the room rather than the air. This helps to keep walls and furniture in humid areas warm, dry and free of mould. All units are made with Mirrored Safety Glass and manufactured from the highest quality materials under strict quality control and incorporate Herschel's innovative EASY-FIX mounting system. A stylish, energy-efficient addition to bathrooms, Select XLS mirrors are also popular for hallways, bedrooms and living rooms. The Select XLS panels are specifically designed to be maintenance free and to last for many years. With close to 100% recyclable packaging and a heater design that is fully compliant with European energy saving regulation (Lot 20) when used with your choice of XLS thermostat control (sold separately), Select XLS is certified to appropriate country standards and is subject to rigorous testing by TUV. Available Models * The heated areas are an indicative guide only. The actual heated area will depend on the heat loss of the room which is influenced by many factors including construction type, external walls, window area and insulation levels. Always use the Herschel online calculator or contact your dealer or installer for an accurate specification. Surface Rear Panel Surface Temperature Voltage Protection Class Cable Installation Certificates Warranty Technical Details ESG Safety Glass with reflective Mirror coating Sheet steel, with Herschel Easy-Fix mounting system 95 -105°C 220 - 240V 50 Hz IP44 1.8m Wall-mounted only Important The Select XLS Mirror comes with one EASY-FIX mounting bracket. When installed, the front of the panel will extend a total of 5cm from the wall. The panel will radiate heat into the room and will perform best when mounted in a position free of any direct obstructions such as a sofa. The panel will need to be wired into the mains and this should be carried out by a suitably qualified electrician. Refer to installation instructions for full details.