Zenith A1Demarcation / Welded mesh The Zenith A1 mesh panel fence is a strong and flexible perimeter protection solution. The fence provides effective anti-climb protection with tightly configured mesh (76.2 x 12.7 mm) preventing toe or finger holds. The strong steel mesh panel is SR1 rated to resist continuous forced entry attempts with a standard intruder toolset (knives, pliers and screwdrivers) for at least 1 minute. The mesh panels are securely attached to the posts with a flat bar and M8 bolts (with form G washer and nut). An extra option is to have the mesh buried 300 mm in the ground to prevent intruders tunnelling under the fence (this option is not available if fence posts are mounted on a base plate at ground level). Vertical arms, lean over arms, Y and T bar extensions, plus barbed wire toppings, can be added to enhance security. The Zenith SR1 is ideal for factories, commercial properties, schools, railways and hospitals. • LPS 1175 A1 rated against intruder tools • Secured By Design accreditation • Tight mesh configuration prevents climbing • Mesh buried 300 mm in the ground to prevent tunnelling (optional) • Quick and easy installation • Easily combined with gates and detection Experts in perimeter protection

Technical specifications Material Steel Certificates • Polyester powder coating according to BS EN 13438 • Hot dip galvanized according to BS EN 1461 • Tested to LPS 1175 A1 • Secured By Design accreditation Panel width 2515 mm Ordering information Contact your local Heras office for precise ordering details. Colour (other colours available upon request) Finish Mesh profile RAL 6005 (moss green) RAL 9005 (jet black) Galvanized and polyester powder coated 76.2 x 12.7 mm Mesh wire diameter 4 mm Suggested accessories / products • Perimeter intrusion detection (PIDS) • Vertical arms, lean over arms,...