Catalogs >
HELVAR >
LL1x30-E-CV24

LL1x30-E-CV24
1 / 3Pages

Catalog excerpts

LL1x30-E-CV24 30 W Constant Voltage LED driver fteeJtm in li^-tin^ 30 W 220-240 VAC 50-60 Hz • 24 V constant voltage output • SELV protection for safety and flexibility in luminaires • Open circuit, short circuit and overload protection • Suitable for Class I and Class II luminaires • Strain reliefs for independent use • Suitable for use with LL1xCV-DA driver extension in DALI dimmable solutions Mains Characteristics Voltage range Max mains current at full load Frequency Power factor at full load THD at full load Input Power at no load Leakage current to earth Tested surge protection Tested fast transient protection 198-264 VAC 0.17 A 50 - 60 Hz 0.95 < 15 % < 0.5 W < 0.7 mA 1 kV L-N, 2 kV L-GND (IEC 61000-4-5, performance criteria B) 2 kV (IEC 61000-4-4, performance criteria B) Load Output (SELV < 60 V) Output voltage (U-OUT) 24 V Output voltage tolerance ± 5 % Max output current (I-OUT) 1.25 A Efficiency, at full load 86 % Operating Conditions and Characteristics Max.temperature at tc point Ambient temperature range Storage temperature range Maximum relative humidity Life time (90 % survival rate) Connections and Mechanical Data Wire size Wire type Wire insulation Maximum driver to LED wire length Weight IP rating 0.5 - 1.5 mm2 Solid core and fine-stranded According to EN 60598 5m Note: See page 2 for connections and dimensions Helvar | Data is subject to change without notice. More information at: www.helvar.com

Open the catalog to page 1

Helvar Constant Voltage LED Driver LL1x30-E-CV24<v 220-240 VAC 50/60 Hz *<= Compatible with DALI Driver Extension_ KeiLaranta 5 FI-02150 Espoo Finland helvar.com Quantity of drivers per miniature circuit breaker 16 A Type C Type-C MCB's with trip characteristics according to EN 60898 are recommended. 2 Helvar | Data is subject to change without notice. More information at: www.helvar.com

Open the catalog to page 2

Installation and conformity freedom1 in lijktiny LL1x30-E-CV24 LED driver is suited for either built-in and independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Operating conditions of the LED...

Open the catalog to page 3