1x30 W Constant Voltage LED driver • Open & short circuit protection • Over voltage protection • 12 V Constant voltage output • Maximum 30 W load • Suitable for use in Class I and Class II luminaires, as well as for independent use • Double insulated enclosure • Suitable for use with LL1-CV-DA driver extension for DALI dimmable solutions and LL1-CV-SC for Switch-Control applications Constant Voltage LED Driver LL1x30-CV12 Qt 220-240 VAC 50/60 Hz Compatible with DALI Driver Extension_ Keilaranta 5 FI-02150 Espoo Finland helvar.com Mains Characteristics Connections and Mechanical Data Max mains current at full load 0.2 A Frequency 50 - 60 Hz Input Power at no load 0.5 W Wire type solid core and fine-stranded Maximum driver to LED wire length 5m Weight 240 g Load Output (SELV < 60) Output voltage (U-OUT) 12 V Max output current (I-OUT) 2.5 A Max output power 30 W Efficiency, at full load, typical 0.83 Operating Conditions and Characteristics Max.temperature at tc point 80°C Ambient temperature range -15...+45 °C Storage temperature range -40...+80 °C Maximum relative humidity no condensation Life time 30 000h, at TC max Radio Frequency Interference, acc. to EN 55015 General and safety requirements EN 61347-1 Particular safety requirements for d.c. or a.c. supplied electronic controlgear for LED modules, acc. to EN 61347-2-13 Performance requirements, acc to EN 62384 Mains current harmonics, acc. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3 ENEC, CE, and SELV marked Note: See page 2 for dimensions Helvar | Data is subject to change without notice. More information at: www.helvar.com

Helvar freedom1 in lijktiny Wiring & connectivity LL1x30-CV12 LED driver is suited for either in-built and independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Specifications of the LED drivers may...