Helvar ■ftreedDfa in lijktinj • Fixed constant current output: 500 mA • Maximum 20 W toad • Open and short circuit protection • Overvoltage protection • Over temperature protection • Suitable for Class I, II and III luminaires • Linear enclosure with strain relief for independent use Connections Note: Not suitable for load side switching operation. Mains Characteristics Voltage range 198 - 264 VAC Max mains current at futt toad 0.15 - 0.20 A Frequency 50 - 60 Hz Load Output (SELV < 60 V) Output current 500 mA Efficiency, at futt toad, typical s 0.88 Connections and Mechanical Data Wire size Wire type Maximum driver to LED wire tength Weight IP rating 0.5 - 1.5 mm2 sotid core and fine-stranded 5 m 70 g IP20 Operating Conditions and Characteristics Max.temperature at Tc point 75 °C Ambient temperature range -15...+45 °C Storage temperature range -40...+80 °C Maximum retative humidity no condensation Life time 30 000 h, at Tc max Conformity & Standards General safety requirements Particular safety requirements for DC or AC supptied electronic controt gear for LED modutes, acc. to Performance requirements, acc. to Mains current harmonics, acc. to Limits for Vottage Formations and Fticker, acc. to Radio Frequency Interference, acc. to Immunity standard, acc. to ENEC, CE & SELV marked Note: See page 2 for dimensions Helvar | Data is subject to change without notice. More information at: www.helvar.com

LL1x20-E-CC-500 LED driver is suited for either in-built or independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Specifications of the LED drivers may never exceed the operating conditions as per the...