LL1x15-E-CC-500

Product catalog summary

Specifications:
The LL1x15-E-CC-500 is a 15W constant current LED driver designed for use with LED luminaires. It operates within a voltage range of 198-264 VAC and a frequency of 50-60 Hz. The driver provides an output current of 500 mA with a maximum output power of 15W and efficiency of ≥ 0.85 at full load. It is suitable for ambient temperatures ranging from -15°C to +45°C and can be stored between -40°C and +80°C. The driver has a lifetime of 30,000 hours at maximum Tc temperature of 75°C.

Connections and Mechanical Data:
The driver supports wire sizes from 0.5 to 1.5 mm² and can accommodate both solid core and fine-stranded wires. The maximum wire length from driver to LED is 5 meters. It has an IP20 rating and weighs 70 grams.

Conformity & Standards:
The driver complies with several standards including EN 61347-1, EN 61347-2-13, EN 62384, EN 61000-3-2, EN 61000-3-3, EN 55015, and EN 61547. It is marked with TUV, ENEC, CE, and SELV.

Features:
The driver offers fixed constant current output, short circuit protection, overvoltage protection, and over temperature protection. It is suitable for Class II luminaires and features a linear enclosure with strain relief.

Installation & Operational Considerations:
The driver can be used both inside and outside the luminaire, with strain relief ensuring secure wiring. It is important to maintain the maximum Tc temperature for reliable operation. The preferred installation position is with the top cover facing upwards.

Wiring Considerations:
Wiring should adhere to the datasheet specifications and EN 60598 recommendations. Type-C MCBs are recommended for circuit protection. The driver supports different luminaire classifications, and SELV-rated drivers require insulation from the luminaire earth connection.

Catalog excerpts

| LL1x15-E-CC-5001x15 W Constant Current LED d river -freedoM in lighting • Fixed constant current output: 500 mA 15 W 220 - 240 V, 50 - 60 Hz • Maximum 15 W toad • Short circuit protection • Overvoltage protection • Over temperature protection • Suitable for Class II luminaires • Linear enclosure with strain relief for independent use Note: Not suitable for load side switching operation. Mains Characteristics Voltage range 198 - 264 VAC Max mains current at futt toad 0.13 - 0.18 A Frequency 50 - 60 Hz Efficiency, at futt toad, typical s 0.85 Connections and Mechanical Data Wire size 0.5 - Wire type sotid Maximum driver to LED wire tength 5 m Weight 70 g Operating Conditions Max.temperature at Tc point Ambient temperature range Storage temperature range Maximum retative humidity Life time and Characteristics 75 °C -15...+45 °C -40...+80 °C no condensation 30 000 h, at Tc max (90 % survivat rate) Conformity & Standards Generat and safety requirements EN 61347-1 Particutar safety requirements for d.c. or a.c. supptied etectronic controtgear for LED modutes, acc. to EN 61347-2-13 Performance requirements, acc to EN 62384 Mains current harmonics, acc. to EN 61000-3-2 Limits for Vottage Ftuctuations and Fticker, acc to EN 61000-3-3 Radio Frequency Interference, acc. to EN 55015 TUV, ENEC, CE & SELV marked Note: See page 2 for dimensions Helvar | Data is subject to change without notice. More information at: www.helvar.com

Open the catalog to page 1

LL1x15-E-CC-500 LED driver is suited for either in-built or independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Specifications of the LED drivers may never exceed the operating conditions as per the...

Open the catalog to page 2

All HELVAR catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list