| LL1x12-E-CC-3501x12 W Constant Current LED d river -freedoM in lighting • Fixed constant current output: 350 mA 12 W 220 - 240 V, 50 - 60 Hz • Maximum 12 W toad • Short circuit protection • Overvoltage protection • Over temperature protection • Suitable for Class I, II and III luminaires • Linear enclosure with strain relief for independent use Note: Not suitable for load side switching operation. Mains Characteristics Voltage range 198 - 264 VAC Max mains current at futt toad 0.11 - 0.15 A Frequency 50 - 60 Hz Efficiency, at futt toad, typical s 0.83 Connections and Mechanical Data Wire size Wire type Maximum driver to LED wire tength Weight IP rating 0.5 - 1.5 mm2 sotid core and fine-stranded 5 m Conformity & Standards Radio Frequency Interference, acc. to Immunity standard, acc. to Performance requirements, acc to TUV, ENEC, CE & SELV marked Operating Conditions Max.temperature at Tc point Ambient temperature range Storage temperature range Maximum retative humidity Life time and Characteristics 75 °C -15...+45 °C -40...+80 °C no condensation 30 000 h, at Tc max (90 % survivat rate) Note: See page 2 for dimensions Helvar | Data is subject to change without notice. More information at: www.helvar.com

LL1x12-E-CC-350 LED driver is suited for either in-built or independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Specifications of the LED drivers may never exceed the operating conditions as per the...