LC60DS-DA-700-1400
5Pages

Helvar 60.2 W SELV Dimmable DALI-2 LED d river Product code: 5934 • DALI-2 certified LED driver, 1-100 % dimming range • SELV output protection for safety and flexibility in luminaires • Low current ripple, complying with IEEE 1789 recommendation • Amplitude dimming forthe highest quality light output • Current setting via dip-switches • Ideal solution for Class I and Class II luminaires • For driving Class III (SELV) luminaires, optional strain relief available for independent use outside of luminaire (LC-SRC) Functional Description • Adjustable constant current output: 700 mA to 1400 mA (default) • Current setting via with dip-switches • Amplitude dimming technology for the highest quality light in every application • Suitable for flicker-free camera recording applications • Optimal fit for EPBD/BREEAM/LEED/WELL due to flicker-free light, energy efficiency and controllability • Push to Fade functionality for easy-to-use intensity control with smooth fade in transitions • Potted casing providing additional cover against vibration • Overload, open & short circuit protection Mains Characteristics Nominal rated voltage range AC voltage range DC voltage range Mains current at full load Frequency Stand-by power consumption THD at full power Tested surge protection Tested fast transient protection 220 V - 240 V, 50 - 60 Hz 198 VAC - 264 VAC Withstands max. 320 VAC (max. 1 hour) Withstands min. 176 VAC (max. 1 hour) 198 VAC - 280 VDC 0.28 - 0.32 A 50 Hz - 60 Hz < 0.5 W < 10 % 1 kV L-N (IEC 61000-4-5) 2 kV L/N-GND (IEC 61000-4-5) 4 kV (IEC 61000-4-4) Insulation between circuits & driver case Mains circuit - SELV circuit Double/reinforced insulation DALI circuit - SELV circuit Double/reinforced insulation Mains circuit - DALI circuit Basic insulation Mains, DALI and output - Driver case Double/reinforced insulation 700 mA - 1400 mA (default) ± 5 % < ±3 %* at s 120 Hz *] Low frequency < 0.06* < 0.02* *) At full power, measured with Cree XP-G LED modules. 60 V Load Output (SELV <60 V) Output current (Iout) Accuracy Ripple PstLM SVM Uout (max) (abnormal) Helv *$H£\OragyA$,rgBipeR.§glec-dt)1i5(}:El£pe®it onpngeESata is subject to change without notice. www.hetvar.com

Note: 1) Dimming between 1 - 100 % possible across the operating window, restricted by the absolute minimum dimming current of 10 mA 2) Current value is adjustable in steps via dip-switch. See dip-switch settings in page 3 for details. Driver performance Typical power factor Total output power (W) Total output power (W) Operating Conditions and Characteristics Absolute highest allowed tc point temperature Tc life (50 000 h) temperature 85 °C Ambient temperature range –20 °C ... +50 °C* Storage temperature range –40 °C ... +80 °C Maximum relative humidity No condensation Life time (90 %...

| LC60DS-DA-700-1400Amplitude dimming technology Dimming range LC60DS-DA-700-1400 LED driver implements amplitude dimming technology across whole dimming range. Amplitude dimming offers the best available technology for dimming the light output in an accurate and flicker-free way to ensure high quality lighting in even the most demanding situations such as camera recording applications. Amplitude dimming technology complies with IEEE 1789-2015 recommendations of current modulation to mitigate health risks to viewers. CONTINOUS CURRENT Total continous current of the drivers and installation...

Connections and Mechanical Data Wire size Wire type Wire insulation Maximum driver to LED wire length Weight IP rating 0.5 mm2 - 1.5 mm2 Solid core and fine-stranded According to EN 60598 1.5 m 357.3 g IP20 Helvar LED Driver LC60DS-DA-700-1400 220-240 V 5D-6D Hz 0.46 A Umax) U-LEDdc l-LED Prated <eilaranta 5 FI-02150 Espoo -inland ielvar.com *? Helvar | Helvar Oy Ab, Keilaranta 5 FI-02150 Espoo, Finland. Data is subject to change without notice. www.helvar.com

Information and conformity LC60DS-DA-700-1400 LED driver is suited for built-in usage in Luminaires. With external strain relief (LC-SRC) independent use is possible too. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets....