Liberty Switch™ Harlequin Liberty Switch is a professional multi-use floor system which transforms between a rigid theatrical floor and a sprung performance floor at the touch of a button. Liberty Switch is a modular multi-use floor system consisting of a base unit with the control and drive mechanisms topped with a Harlequin Liberty sprung floor. It is designed for venues who regularly put on both dance and theatrical performances and so require both a sprung and a rigid floor in the same performance or rehearsal space. Specification guide: • Modular system that can be modified to meet any structural design requirements Can be custom designed to allow for features such as traps, lifts and revolves as required. Transforms from rigid to sprung mode in around 2 minutes (subject to size of installation). Controlled remotely via a hard-wired master control unit. A wireless control system with remote monitoring can be specified if required. Can be integrated with most existing stage control or building management systems. Can be ‘zoned’ to create sprung or rigid areas within the floor if required All components are low maintenance and require no lubrication. An annual maintenance contract is available. Floor depth: 100mm to 124mm depending on subfloor not including chosen performance surface. Power requirement: single phase 16 Amp. Sub-floor must be finished to SR1. Scan the QR-Code for more information If you would like further information or advice please contact us on +44 (0) 1892 514 888 or [email protected] Harlequin® is a registered trademark of British Harlequin plc