HALFEN HBS-05 Screw Connections
16Pages

HALFEN HBS-05 SCREW CONNECTIONS Quality mark RAL-GZ 658/2

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS General Over view HALFEN HBS-05: The versatile screw connection HALFEN HBS-05 Screw connections guarantee planning reliability and increased cost eciency. By using high-quality base materials, and with the high manufacturing standards which are standard in our certicated production facilities, the continuous reliability and quality of HALFEN products is guaranteed. (DIBt Deutsches Institut für Bautechnik = German institute for building technology) • Approval also for non-predominantly static loads and maximum fatigue strength for example: use in...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS General Over view Ocial building authority approval DIBt Z-1.5-189 An extensive range of threaded sockets and end-anchor with building authority approval allows a wide range of possible applications. All types can be used for predominantly static loads as well as for non-predominantly static loads. In predominantly static loads, as for continuous rebar, all of these connection types can be exposed to 100% of both tensile and compression load capacity. No torque wrench or special tools are required to install the sockets; a simple visual check is...

Application: HBS-05-Seismic according to test certicate A - 32/08 Maximum ductility and optimised technologies in manufacturing Using the best quality ductile materials combined with the best technology in thread manufacturing guarantees maximum ductility and safety in the screw connection, even under the eects of large earthquakes. Leutschen Tower in Zurich was constructed using HBS-05-Seismic products The bolt threads are cold formed; the resulting surface compression increases the hardness of the thread. The conical shaping at the bar-tip guarantees a tight t of the bar and reduces the...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS Compatible HALFEN Products Structural steel connections using the HALFEN HUC Universal connection The HALFEN HUC Universal connection is a highly ecient system for introducing static stresses into concrete components using bolt connections. HSC-B Concrete steel connector End plate for girder connection, fin-plates or for individual constructions The HSC-B Connector is designed for large loads, safely transferring tension loads, shear loads and bending moments. The calculation for HSC-B Socket bars with and without end anchors is described in...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS Product Over view HBS-05-B Socket bars with forged socket and nailing ange HBS-05-S Socket bars with screw socket Reinforcing steel bars B 500 B according to DIN 488-1 HBS-05Rebar ds Reinforcing steel bars B 500 B according to DIN 488-1 Dimensions Weight Special thread Other bar-lengths and bending shapes are available on request (→ page 9). Please state required length when ordering. Other bar-lengths and bending shapes are available on request (→ page 9). Special lengths may have resistance flash welded bar joints at delivery. Please state...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS Product Over view Reinforcing steel bars B 500 B according to DIN 488-1 HBS-05Rebar ds Color code Dimensions Thread HBS-05-S-Seismic Socket bars with screw sockets [mm] Reinforcing steel bars B 500 C according to EN 1992-1-1/BS4449 Special thread Special thread Other bending shapes are available on request (→ pages 9-10). Please state required length when ordering. Also available with left-hand thread HBS-05-AL. Connecting rebars with left-hand thread on request. Other bar-lengths and bending shapes are available on request (→ page 9). Please...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS Load Bearing Capacity Forces (rebar) and ductility for HBS-05 B 500 B Forces (rebar) Fsd for HBS-05 Socket and connecting bars B 500 B Reinforcing steel bars B 500 B according to DIN 488-1 Bar diameter [mm] Forces (rebar) and ductility for HBS-05-Seismic Forces (rebar) Fsd for HBS-05 Socket and connecting bars B 500 C Reinforcing steel bars B 500 C according to EN 1992-1-1/BS4449 Bar diameter [mm] Socket bar with screw socket Socket bar, forged, with nail ange Connecting bar Left-hand thread Double socket bar Double connecting bar Bent Bent 2x...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS Bending Shapes/Possible Combinations HBS-05-BG Bent socket bars, forged socket with nailing ange min. x and min. y dimensions for bent socket bars -BG [mm] with bending roll Ø dBR: 4ds Order example: Socket bars BG, bent 1× HBS-05-BG-16 x = 250 mm y = 550 mm dBR = 10 ds Article description Thread State required lengths x and y in [mm] when ordering. If not stated otherwise when ordering, α will be delivered as = 90°. Examples of bending shapes: BG HBS-05-SG Bent socket bars with threaded sockets min. x and min. y dimensions for bent socket bars...

HA LF E N H BS - 0 5 S CRE W CO NNE CTI ONS Bending Shapes / Possible Combinations HBS-05-AG/-ALG Connecting bars bent Connecting bars - AG = curved, with right-hand thread - ALG = curved, with left-hand thread Order example: Connecting bars AG, bent 1x HBS-05-AG 16 x = 250 y = 1000 dBR > 10 ds Bent connecting bars AG, -ALG [mm] Article description Thread State required lengths x and y in [mm] when ordering. If not stated otherwise when ordering, α will be delivered as = 90°. HBS-05-BD/-SD/-AA Double sockets and connecting bars BD Min. length for double socket bar HBS-05 [mm] -AA, -AEA Make...

HBS-05-R-/L- Connecting socket Right/left hand connection socket with overlapping counter threads to connect a non-turnable connection bar with a lefthand thread for example (HBS-05-ALG bent) to a xed connection bar with right-hand thread. R-/L-Connecting socket [mm] Article description Thread intersection Left-hand thread Marking lefthand thread Right-hand thread Installation Prior to installation HBS-05-RL After installation Recess: Trapezoidal box, see accessories min. distance between two connection-joints in one plane HBS-05-RDZ [mm] Article description State required length L [mm]...