HALFEN Cast-In Channels - Curved Solution
12Pages

Cast-in Channels – Curved Solution T h e a d va n t a ge s a t a g l a n c e esides the excellent adjustability HALFEN cast-in channels oer enormous time advantages during application. The result: fast construction progress and therefore economisation. Cast-in channels HTA-CS cold formed Save and reliable • No damage of the reinforcement • Approved for building components with re protection requirement • Suitable for the application in the concrete compressive and concrete tension zone • High corrosion resistant steels available Cast-in channels HTA-CS • Fatigue load capacity • Building...

H A L F E N C A S T - I N C H A N N E L S – C U RV E D S O LU T I O N General information Curved cast-in channels are applied in many dierent areas. At the same time they are planned and produced on an objectspecic basis. Whether for tunnelling, supply tubes, sewage disposal plants or other curved buildings, the HALFEN cast-in channels HTA-CS and HZA-CS are always a save and reliable solution in all anchoring challenges. Minimum bending radii HALFEN cast-in channels L outer profile slot inner profile trench Ri = Radius inner prole slot Ra = Radius outer prole slot L = Prole length after...

Cast-in channel, ocially approved Z - 21.4 - 34 Cast-in channel, ocally approved Z - 21.4 - 34 Item name Note: Supplied with bolt anchor or welded anchor, Delivery subject to conrmation, unless otherwise specied Length [mm] Specication: FV = hot-dip galvanised HTA-CS 72/48 FV 550 - Kf HTA-CS 72/48 FV - 1050 - Kf HTA-CS 72/48 FV - 5400 - Kf Item no. 1001.129-00001 Specication: A4 = stainless steel W 1.4571/1.4401 (A4) HTA-CS 72/48 A4 550 - Kf HTA-CS 72/48 A4 - 1050 - Kf HTA-CS 72/48 A4 - 5400 - Kf Item no. 1001.129-00002 Item name Length [mm] Specication: FV = hot-dip galvanized HTA-CS 52/34...

Cast-in channel, ocially approved Z - 21.4 - 34 Cast-in channel, ocially approved Z - 21.4 - 34 Item name Length [mm] Specication: FV = hot-dip galvanised HTA-CS 50/30 FV 550 - Kf HTA-CS 50/30 FV 800 - Kf HTA-CS 50/30 FV - 1050 - Kf HTA-CS 50/30 FV - 3050 - Kf FV - 5400 - Kf HTA-CS 50/30 Item no. 1001.089-00001 Item name Length [mm] Specication: FV = hot-dip galvanised HTA-CS 40/22 FV 550 - Kf HTA-CS 40/22 FV 800 - Kf HTA-CS 40/22 FV - 1050 - Kf HTA-CS 40/22 FV - 1300 - Kf HTA-CS 40/22 FV - 1550 - Kf HTA-CS 40/22 FV - 1800 - Kf HTA-CS 40/22 FV - 2050 - Kf HTA-CS 40/22 FV - 2300 - Kf HTA-CS...

Cast-in channel, ocially approved Z - 21.4 - 34 Cast-in channel, ocially approved Z - 21.4 - 34 Item name H TA - C S 5 4 / 3 3 Cast-in channel, ocially approved Z - 21.4 - 34 Item name Length [mm] Specication: FV = hot-dip galvanised HTA-CS 54/33 FV 550 - Kf HTA-CS 54/33 FV - 1050 - Kf FV - 5400 - Kf HTA-CS 54/33 Item no. 1001.109-00001 Length [mm] Specication: FV = hot-dip galvanised HTA-CS 49/30 FV 550 - Kf HTA-CS 49/30 FV - 1050 - Kf HTA-CS 49/30 FV - 3050 - Kf HTA-CS 49/30 FV - 5400 - Kf Item no. 1001.079-00001 Specication: A4-Ank.A4 = channel + anchor stainless steel W 1.4571/1.4401...

Cast-in channel, ocially approved Z - 21.4 - 34 Cast-in channel, ocially approved Z - 21.4 - 34 Item name Item name Length [mm] Specication: FV = hot-dip galvanised HTA-CS 40/25 FV 550 - Kf HTA-CS 40/25 FV - 1050 - Kf HTA-CS 40/25 FV - 3050 - Kf HTA-CS 40/25 FV - 5400 - Kf Item no. 1001.069-00001 Length [mm] Specication: FV = hot-dip galvanised HTA-CS 28/15 FV 550 - Kf HTA-CS 28/15 FV - 1050 - Kf HTA-CS 28/15 FV - 3050 - Kf HTA-CS 28/15 FV - 5400 - Kf Item no. 1001.019-00001 Cast-in channel, ocially approved Z - 21.4 - 34 Length [mm] Specication: FV = hot-dip galvanised HTA-CS 38/17 FV 550...

Cast-in channel ocially approved Z - 21.4 - 1691 Cast-in channel ocially approved Z - 21.4 - 1691 Item name Length [mm] Specication: FV = hot-dip galvanised HZA-CS 38/23 FV 550 - Kf HZA-CS 38/23 FV 800 - Kf HZA-CS 38/23 FV - 1050 - Kf HZA-CS 38/23 FV - 3030 - Kf HZA-CS 38/23FV - 5400 - Kf Item no. 1002.029-00001 Item name Length [mm] Specication: FV = hot-dip galvanised HZA-CS 29/20 FV 550 - Kf HZA-CS 29/20 FV - 1050 - Kf HZA-CS 29/20 FV - 3030 - Kf HZA-CS 29/20 FV - 5400 - Kf Item no. 1002.019-00001 Cast-in channel, ocially approved Z - 21.4 - 145 Item name Length [mm] Specication: FV =...

Cast-in channel pairs Material/specication: Channel: FV = A4 = HCR = We recommend spacers when ordered in stainless steel: Spacer in BSt 500NR. hot-dip galvanised steel, stainless steel, stainless W1.4547, W1.4529 Spacer: Reinforcing steel BSt 500S or BSt 500NR (stainless steel) ∅ 10 - 16 mm Order sample: HALFEN Cast-in channel pair HTA-CS 38/17, l = 1050 mm, a = 200 mm, hot-dip galvanised, including ller Prices for channel pairs include an additional surcharge. Prices and surcharges are on request. Grounding strap Flat steel 40x5 welded factory-provided as grounding strap on back of...

© 2010 HALFEN · HTA-CS 10-E · www.halfen.com

CON TA C T H A L F E N WO RLDWIDE HALFEN is represented by subsidiaries in the following 14 countries, please contact us: HALFEN Gesellschaft m.b.H. Leonard-Bernstein-Str. 10 1220 Wien Phone: +43 - 1 - 259 6770 E-Mail: office@halfen.at Internet: www.halfen.at HALFEN-FRIMEDA N.V. Borkelstraat 131 2900 Schoten Phone: +32 - 3 - 658 07 20 E-Mail: info@halfen.be Internet: www.halfen.be HALFEN Construction Accessories Distribution Co.Ltd. Room 601 Tower D, Vantone Centre No.A6 Chao Yang Men Wai Street Chaoyang District Beijing · P.R. China 100020 Phone: +86 - 10 5907 3200 E-Mail: info@halfen.com...

For further information please contact: www.halfen.com © 2010 HALFEN GmbH, Germany applies also to copying in extracts.