YOUR BEST CONNECTIONS

D ET A N R OD S YS TE MS DETAN — a Creative Design Element In this project DETAN was purposely applied as a visual, creative design element. The effect is an elegant, aesthetic structure. DETAN fits perfectly into the architectural concept and significantly contributes to the overall style. Project: Manchester Civil Justice Centre, UK

D ET A N R OD S YS TE MS DETAN — a Static Element with Aesthetical Claim Cross bracings provide a futuristic, lightweight construction. For structural reasons, DETAN runs diagonally through the glazed façade. The delicate DETAN system is perfectly integrated, emphasizing the fascinating overall impression of the building. Project: The Sage, Gateshead © 2014 HALFEN · DT 14.1-E · www.halfen.com

ETA -European Technical Approval — a secure base for structural design DETAN-E • European Technical Approval ETA-11/0311 • CE-certication • type-test report S-WUE/120315 according to EC3 • tension rod system DETAN-E in stainless steel now with European Technical Approval ETA-11/0311 • an additional type-test report based on the ETA approval and Eurocode 3 allows a straightforward application of design values from tables • permanent quality and production monitoring by a supervisory institution • CE-certication recognized in all European Union countries • 25% higher load capacity due to the rod's...

Certified HALFEN quality The RAL Quality Mark is awarded by the Association for façade xing technology exclusively to companies that full the high standards required for “quality and test specications for façade xing technologies”. Independent, biannual monitoring provided by specialists at Germanischer Lloyd guarantee that the importance of products, quality and the associated service are observed. Included in the quality analysis are; specications, quality management, logistics, competent technical advice, high-quality technical documentation and software, guarantee benets and tender documents....

Corrosion protection The DETAN Rod systems oer high protection against corrosion, especially in vulnerable areas, e.g. the threads. A further improvement; the spanner notches are milled before the rods are hot-dip galvanized. The forks and locking nuts are hot-dip galvanized to ensure top-quality durable protection against corrosion as well as a good mechanical resistance. Reliable and durable • tension rods completely hot-dip galvanized after the manufacturing process • no danger of hydrogen embrittlement • no aking zinc hot-dip galvanized (brushed) • large spanner notches ensure that rod can...

HALFEN optimises building site logistics Rod marked with system information Mix-ups impossible • order and customer specic data (order and item number, rod length, system size) • standard for diameter 16 mm systems and larger (DETAN-S460) Label with product-specic data Simple and customer-oriented • showing product-specic information, e.g. system length, system diameter etc. • easy tracking and sorting by item numbers • ideal and fast construction site logistics • on customer request: project-specic data, e.g. oor numbers or node Assembly and safety notes Forks must be correctly aligned (Fig....

D ET A N R OD S YS TE MS System Over view Ordering procedure →page 9 Load capacity, system dimensions and materials: Steel S460 → pages 12-13 Stainless steel → pages 14-15 or NE roval f DETA N pp tem A ys s AET teel s ss inle The DETAN Rod system is approved for predominantly static loads only. System variants: Ordering example →page 9 Load capacity, system dimensions and materials: Steel S460 → pages 12-13 Stainless steel → pages 14-15 Suspension consists of a system variant with coupler and a lug and one basic system with couplers or couplers with lug Ordering example →page 9 Load capacity,...

D ET A N R OD S YS TE MS Product Range Over view : DETAN Tension Rod System Ordering procedure Example order: Tension rod system, DETAN-S460, dS = 30 mm, L = 4500 mm fv, 1 coupler Product / DETAN System/ system diameter ds / system length L / specication Abbreviations: wb = mill finish hdg = fv = hot-dip galvanized Basic system System diameter dS Ordering example (material steel hdg): Tension rod system, DETAN-S460, dS = 52 mm, L = 3620 mm fv System variants with coupler: System diameter dS Ordering example (material stainless steel): Tension rod system, DETAN-E, dS = 24 mm, L = 11200 mm, 2 couplers...

D ET A N R OD S YS TE MS Product Range Over view : DETAN Tension Rod System System variants with cross coupler for cross bracing: System diameter dS Ordering example (material steel hdg): Tension rod system, DETAN-S460, dS = 30 mm, L = 5600 mm fv, 1 cross coupler Abbreviations: wb = mill finish, hdg = fv = hot-dip galvanized Note: Maximum 2 cross couplers possible. Items not delivered pre-assembled. System DETAN-S460, European Technical Approval ETA-05/0207 System diameter ds [mm] Available minimum system length L [mm] Rod (fv or wb) System DETAN-E, European Technical Approval ETA-11/0311 System...

D ET A N R OD S YS TE MS Product Range Over view : Cross Bracings, DETAN Compression Rod System Anchor disc Note: • maximum of 8 tension rod connections possible • connecting angle α min = 40° 1. Ordering example (material steel): Anchor disc, DETAN-S460, dS = 42 mm, 4 holes drilled α = 40°, β = 140° (see drawing), fv 2. Ordering example (material stainless steel): Anchor disc, DETAN-E, dS = 24 mm, 8 holes drilled α = 45° (see drawing) System DETAN-S460, European Technical Approval ETA-05/0207 System diameter ds [mm] System DETAN-E, European Technical Approval ETA-11/0311 10 Alternatively, please...

D ET A N R OD S YS TE MS System DETAN-S460, European Technical Approval ETA -05/0207 System components — materials and finish Tension rod Couplers, locking nuts Anchor disc hot-dip galvanized hot-dip galvanized hot-dip galvanized hot-dip galvanized mill finish hot-dip galvanized hot-dip galvanized hot-dip galvanized System load capacities; system- and available rod lengths; material specification, steel strength grade S355 (diameter ds 10-12) or S460N System diameter ds [mm] System load capacities Load capacity NR,d [kN] Available minimum system length L [mm] black, h.d. galvanized Available...